THT-LP (26" wide)

Post your build odyssey here.
Message
Author
88h88
Posts: 1603
Joined: Mon Jul 04, 2011 10:20 am
Location: Coventry, UK

Re: THT-LP (26" wide)

#61 Post by 88h88 »

tomsza wrote:
Tom Smit wrote:TLAHs!! :clap:
Tempting. But how to sell to the wifey. That's the question. Unlike the thtlp (size), I suppose they could just, show up one day.
...with a bunch of flowers/pair of shoes/handbag/perfume sat on top with a card written "love from the TLAHs".
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"

Dubwoofer
Posts: 22
Joined: Thu Jan 12, 2012 3:24 am

Re: THT-LP (26" wide)

#62 Post by Dubwoofer »

Looks nice.

tomsza
Posts: 36
Joined: Wed Jan 11, 2012 10:50 am

Re: THT-LP (26" wide)

#63 Post by tomsza »

88h88 wrote:
tomsza wrote:
Tom Smit wrote:TLAHs!! :clap:
Tempting. But how to sell to the wifey. That's the question. Unlike the thtlp (size), I suppose they could just, show up one day.
...with a bunch of flowers/pair of shoes/handbag/perfume sat on top with a card written "love from the TLAHs".
For my wife, it's more like, a case of Mich Lite (bottles), a carton of sigs, and ah, ah...

... well, that's about it. :lol:

tomsza
Posts: 36
Joined: Wed Jan 11, 2012 10:50 am

Re: THT-LP (26" wide)

#64 Post by tomsza »

Dubwoofer wrote:Looks nice.
Thanks. Up close, the finish is nothing to look at. The seconds coat of paint left brush strokes. But she's meant to be heard, and not seen. The power of this thing still startles me at times. 8)

dr_dru
Posts: 4
Joined: Mon Jan 21, 2008 1:10 pm
Location: NYC

Re: THT-LP (26" wide)

#65 Post by dr_dru »

tomsza wrote:So if corner loaded, with a cabinet opening area of ~18"x26", it appears the minimum height would be ~10.64". That would save me some metal. :D
I am not sure how you figured this out. 18 X 26 = 468 sq in. How did you figure out a ~10.64 in. height? Am I missing something in the calculation? :confused:

tomsza
Posts: 36
Joined: Wed Jan 11, 2012 10:50 am

Re: THT-LP (26" wide)

#66 Post by tomsza »

dr_dru wrote:
tomsza wrote:So if corner loaded, with a cabinet opening area of ~18"x26", it appears the minimum height would be ~10.64". That would save me some metal. :D
I am not sure how you figured this out. 18 X 26 = 468 sq in. How did you figure out a ~10.64 in. height? Am I missing something in the calculation? :confused:
26x18=26a+18a

a=height of opening from floor

solve for a

Post Reply