Links to everything you need for your BFD-build, in Europe.
-
- Posts: 176
- Joined: Wed Nov 03, 2010 5:15 am
- Location: Lincs UK
Re: Links to everything you need for your BFD-build, in Euro
Twin core 2x2.0mm 100m roll £51.50 plus vat free delivery from www.beal.org.uk. They also do single core cable and free delivery over £50
built 4 T30 24in BP102 now sold 2 DR280
2 speakerplans 1850, 2 MT102 ,2 X15, 1 G sub now sold
2 T60,s Built plus 4 DR280,s in the build
2 speakerplans 1850, 2 MT102 ,2 X15, 1 G sub now sold
2 T60,s Built plus 4 DR280,s in the build
Re: Links to everything you need for your BFD-build, in Euro
Is there a definitive UK version of the Goldwood tweeters used in most of the cabs? What is everyone else using?
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
- Bill Fitzmaurice
- Site Admin
- Posts: 28916
- Joined: Tue May 02, 2006 5:59 pm
Re: Links to everything you need for your BFD-build, in Euro
There is, sold by CPC Farnell at a ridiculous price. Highwaymen they be. Order them from Leland, even with shipping and duty they'll come in far less expensive.88h88 wrote:Is there a definitive UK version of the Goldwood tweeters used in most of the cabs? What is everyone else using?
-
- Posts: 90
- Joined: Thu Jun 16, 2011 11:51 am
- Location: Bridgend. S.Wales U.K
Re: Links to everything you need for your BFD-build, in Euro
I found this a couple of months ago,a little bit chaper than I paid with CPC..
http://www.stagebeat.co.uk/P/111617/Sta ... KHz+110490
http://www.stagebeat.co.uk/P/111617/Sta ... KHz+110490
-
- Posts: 40
- Joined: Mon Jul 31, 2006 2:59 am
Re: Links to everything you need for your BFD-build, in Euro
We have some of the "good" MPT-016 at stock, located in Germany. If we manage to buy bigger numbers, maybe we can tweak the price a little, just send me a PN.
- Bill Fitzmaurice
- Site Admin
- Posts: 28916
- Joined: Tue May 02, 2006 5:59 pm
Re: Links to everything you need for your BFD-build, in Euro
That's still an outrageous price, double what's justifiable.hermanmonker wrote:I found this a couple of months ago,a little bit chaper than I paid with CPC..
http://www.stagebeat.co.uk/P/111617/Sta ... KHz+110490
-
- Posts: 90
- Joined: Thu Jun 16, 2011 11:51 am
- Location: Bridgend. S.Wales U.K
Re: Links to everything you need for your BFD-build, in Euro
I agree about the price and it's known as rip-off Britain around here,everything has gone through the roof .
Re: Links to everything you need for your BFD-build, in Euro
CPC Farnell were the cheapest for my Beta 8s for the Wedgehorns. My 2512 Deltalites came from Lean Business and were similarly priced at Blue Aran but they've gone up around £20 a piece since I purchased due I guess to the cost of neodynium magnets.
The cheap QTX piezos are very cheap at DFB
http://www.everytronics.co.uk/products/ ... 2.481.html
Not great quality but I weeded out the worst ones and doped the cones on the ones I used with artists varnish and was surprised at the improvement. They also do some crossover components
The cheap QTX piezos are very cheap at DFB
http://www.everytronics.co.uk/products/ ... 2.481.html
Not great quality but I weeded out the worst ones and doped the cones on the ones I used with artists varnish and was surprised at the improvement. They also do some crossover components
2 Jack 112 - DL2512+melded array
4 WH8 - Beta8+melded array
2 T39s LAB12 - coming soon
4 WH8 - Beta8+melded array
2 T39s LAB12 - coming soon
-
- Posts: 40
- Joined: Mon Jul 31, 2006 2:59 am
Re: Links to everything you need for your BFD-build, in Euro
Keep in mind that there are a lot of cheap replacements around. There are a lot of 1016s etc for far less around than the Stageline mentioned, these are of far inferiour quality.
Re: Links to everything you need for your BFD-build, in Euro
This guy has Lab12s for £105 each http://myworld.ebay.co.uk/colosussxb/ He pops up every now and again and it's always Lab12s for some reason.
I've bought from him before with zero issues. I'd buy more but I've already got a pair awaiting cabs.
I've bought from him before with zero issues. I'd buy more but I've already got a pair awaiting cabs.
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
Re: Links to everything you need for your BFD-build, in Euro
I just make a order to the official retailer here in Spain, Deltalites 2512 are at 98€ but I ask them if they corrected their prices, but they said those are the real ones.
Oh btw dont use Viadress.com for package handling and shipping from U.S, its more expensive than the advertise quotes. (at 5lb)...

Oh btw dont use Viadress.com for package handling and shipping from U.S, its more expensive than the advertise quotes. (at 5lb)...
Re: Links to everything you need for your BFD-build, in Euro
Deltalites just arrived ( in the label it says made in U.S.A!) , Im surprised they dont come from the PRC factory at that price. 

Re: Links to everything you need for your BFD-build, in Euro
I need to order some plyyyyyywood to get some more speakers made. Any recommendations at all chaps? UK obviously.
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
Re: Links to everything you need for your BFD-build, in Euro
Is there a SELCO nearby? Good prices but you need to open a trade account
2 Jack 112 - DL2512+melded array
4 WH8 - Beta8+melded array
2 T39s LAB12 - coming soon
4 WH8 - Beta8+melded array
2 T39s LAB12 - coming soon
Re: Links to everything you need for your BFD-build, in Euro
There's a few dotted around Birmingham so not too far at all. How much roughly are sheets there out of interest? The only other place I could find that sells decent stuff is asking £48 a sheet 8'x4' for BB/BB.
A friend of mine is a joiner so getting a card shouldn't be too much of an issue.
A friend of mine is a joiner so getting a card shouldn't be too much of an issue.
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"