2 - Titan 39's and 2 - DR-280's

[Whiterob]

Thanks for all the advice.. Really not too concerned about spending a little extra money if that is why people are suggesting the 250's over the 280's

It is not the reason. The price is very similar. You are building the wrong tool for the job.

already bought the plans for the 280 as I like the idea of not always using subs, as right now I dj thursdays with just my QSC's, as there isnt a whole lot of people, and dragging along bog ol subs just isn't worth it.

"not a lot of people" tells me, people close to speakers most likely. With the 4" tuned ports you get 45hz out of a DR250, unless you figured you needed a pair of DR250s per side most of the time your going down the wrong path. Will you be happy with DR280, of course, should you build them for your circumstance, probably not.

You may want to read this post:
http://billfitzmaurice.info/forum/viewt ... f=2&t=1298

and also reread the plans a couple times before you build. Seems that you may have missed a couple things in them. Print them out and leave them by the toilet, so when you are in your "study" you can read them.

editted to fix something that didn't make sense.

Thanks for that.. I must have missed that post. Lucky for me, on average I can say the audience is greater than 30' away, unless they are dancing right up by me.