Titan39's v-plated and corner loaded playing "A Milli"

Post links to youtube videos of your cabs.
Forum rules
Only links to videos of our cabs are allowed. You tube only, no facebook.
Post Reply
Message
Author
User avatar
Michael Ewald Hansen
Posts: 638
Joined: Tue Aug 16, 2011 10:43 am
Location: Denmark

Re: Titan39's v-plated and corner loaded playing "A Milli"

#16 Post by Michael Ewald Hansen »

doncolga wrote:
Phaedras wrote: Thanks man.. I'm not going to add a second pair to this setup as its not mine but a permanent install at my university.
In that case they should build about 4-6 more and leave them in the corner...woohoo!
Haha, i've built the first pair and I'm not building the second without getting paid for it - so i'd rather build something for myself.. Starting with a TT.. Then I might venture into building a serious rig later :)
Authorized Builder - Denmark
Check out the BFM Facebook page
Top
RENDOG
Posts: 145
Joined: Mon Nov 15, 2010 11:46 am
Location: Florida

Re: Titan39's v-plated and corner loaded playing "A Milli"

#17 Post by RENDOG »

Oh man....I thought the objects moving were on the v-plate. Then you showed that the subwoofers were across the room and I was like NICE!!!

Awesome stuff.
Top
User avatar
Michael Ewald Hansen
Posts: 638
Joined: Tue Aug 16, 2011 10:43 am
Location: Denmark

Re: Titan39's v-plated and corner loaded playing "A Milli"

#18 Post by Michael Ewald Hansen »

RENDOG wrote:Oh man....I thought the objects moving were on the v-plate. Then you showed that the subwoofers were across the room and I was like NICE!!!

Awesome stuff.
Hehe, imagine the faces of the guys in the bar who was getting a demonstration: jaw-dropping! :)

The output of 2 T39's when corner loaded and v-plated is absolutely amazing.. Can't wait to get started on more BF cabs.. Ordered a MCM 55-2421 earlier this week for a T18 for my parents HT.. Im sure it'll be awesome too :)
Authorized Builder - Denmark
Check out the BFM Facebook page
Top
Whiterob
Posts: 201
Joined: Tue Nov 08, 2011 3:18 pm
Location: MN
Contact:
Contact Whiterob

Re: Titan39's v-plated and corner loaded playing "A Milli"

#19 Post by Whiterob »

I put my T-39's on hold for a while, but reading this again gave me inspiration to get em done. Leland, I think I will be ordering some parts friday :)
Why can I never make up my mind?
Top
User avatar
Michael Ewald Hansen
Posts: 638
Joined: Tue Aug 16, 2011 10:43 am
Location: Denmark

Re: Titan39's v-plated and corner loaded playing "A Milli"

#20 Post by Michael Ewald Hansen »

Whiterob wrote:I put my T-39's on hold for a while, but reading this again gave me inspiration to get em done. Leland, I think I will be ordering some parts friday :)
Awesome.. These cabs are nothing short of amazing.. When I first fired up 1 T39 for the first time i thought - cool, thats really nice etc.. When I eventually finished the second one and corner loaded these puppies with a v-plate it was a whooole other reaction! :hyper:
Authorized Builder - Denmark
Check out the BFM Facebook page
Top
88h88
Posts: 1603
Joined: Mon Jul 04, 2011 10:20 am
Location: Coventry, UK

Re: Titan39's v-plated and corner loaded playing "A Milli"

#21 Post by 88h88 »

Still need to make a V plate for ours....... :evil:
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
Top
User avatar
Michael Ewald Hansen
Posts: 638
Joined: Tue Aug 16, 2011 10:43 am
Location: Denmark

Re: Titan39's v-plated and corner loaded playing "A Milli"

#22 Post by Michael Ewald Hansen »

88h88 wrote:Still need to make a V plate for ours....... :evil:
Do it! Its fast and doesnt take much preparation - and you gain as much as adding another cab to the stack..

Made mine and installed t-nuts for mounting it to, in about an hour..
Authorized Builder - Denmark
Check out the BFM Facebook page
Top
88h88
Posts: 1603
Joined: Mon Jul 04, 2011 10:20 am
Location: Coventry, UK

Re: Titan39's v-plated and corner loaded playing "A Milli"

#23 Post by 88h88 »

Need to find someone who stocks decent ply first at which point my existing 2 will be joined by another 2 AND a v-plate. :chainsaw:
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
Top
User avatar
Michael Ewald Hansen
Posts: 638
Joined: Tue Aug 16, 2011 10:43 am
Location: Denmark

Re: Titan39's v-plated and corner loaded playing "A Milli"

#24 Post by Michael Ewald Hansen »

88h88 wrote:Need to find someone who stocks decent ply first at which point my existing 2 will be joined by another 2 AND a v-plate. :chainsaw:
You dont exactly need BB grade ply for a v-plate.. Pretty much any ply will do just fine ;)
Authorized Builder - Denmark
Check out the BFM Facebook page
Top
88h88
Posts: 1603
Joined: Mon Jul 04, 2011 10:20 am
Location: Coventry, UK

Re: Titan39's v-plated and corner loaded playing "A Milli"

#25 Post by 88h88 »

True but I may as well just get a job lot of it and get making more speakers. Anyway, nice job on those. :mrgreen:
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
Top
beofservice
Posts: 70
Joined: Wed Nov 02, 2011 1:33 pm

Re: Titan39's v-plated and corner loaded playing "A Milli"

#26 Post by beofservice »

Phaedras wrote:

AHHHHHHH! Youtube defaults the volume to full! Now I will be deaf for the next 20 minutes...

Outstanding demo with the stuff on the table!
Top
User avatar
Michael Ewald Hansen
Posts: 638
Joined: Tue Aug 16, 2011 10:43 am
Location: Denmark

Re: Titan39's v-plated and corner loaded playing "A Milli"

#27 Post by Michael Ewald Hansen »

beofservice wrote:
AHHHHHHH! Youtube defaults the volume to full! Now I will be deaf for the next 20 minutes...

Outstanding demo with the stuff on the table!
Haha thanks.. And yea, it IS pretty loud.. However, the mic on my iPhone didnt distort a lot, which was surprising!
Authorized Builder - Denmark
Check out the BFM Facebook page
Top
88h88
Posts: 1603
Joined: Mon Jul 04, 2011 10:20 am
Location: Coventry, UK

Re: Titan39's v-plated and corner loaded playing "A Milli"

#28 Post by 88h88 »

Fiiiiiinally got around to starting the v-plate last night as we're supposedly supplying sound for a friend's birthday gig on Friday (nothing like a deadline to make you work). It's all been chopped out to size though at first we thought a leftover sheet we had was 2" too short, turns out we were mistaken so that got cut up. Need to add a handle, figure out the best way to attach it to the cabs and then get it done. Luckily I have tomorrow and Friday off so I can spend some quality time filling and painting things.
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
Top
User avatar
Michael Ewald Hansen
Posts: 638
Joined: Tue Aug 16, 2011 10:43 am
Location: Denmark

Re: Titan39's v-plated and corner loaded playing "A Milli"

#29 Post by Michael Ewald Hansen »

88h88 wrote:Fiiiiiinally got around to starting the v-plate last night as we're supposedly supplying sound for a friend's birthday gig on Friday (nothing like a deadline to make you work). It's all been chopped out to size though at first we thought a leftover sheet we had was 2" too short, turns out we were mistaken so that got cut up. Need to add a handle, figure out the best way to attach it to the cabs and then get it done. Luckily I have tomorrow and Friday off so I can spend some quality time filling and painting things.
Thats cool.. Cant wait to hear your impression of the Titans with the v-plate on.. I put 2 strips of weatherstripping on the inside of the v-plate and drilled 2 holes in the side of the cabs, then mounted 2 t-nuts in each cab and found a bolt that fit to mount it :)
Authorized Builder - Denmark
Check out the BFM Facebook page
Top
User avatar
Tom Smit
Posts: 7566
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Titan39's v-plated and corner loaded playing "A Milli"

#30 Post by Tom Smit »

Do you remember this thread? http://billfitzmaurice.info/forum/viewt ... te#p180514
TomS
Top
Post Reply

Return to “YouTube Links”