Here's my amp rack back panel
here's some additional pictures
This little addition made setting up alot simpler and quicker
Now helping hands understand where everything goes
i had it put together by http://www.vafamsound.com
Amp Rack Back Panel
Amp Rack Back Panel
You do not have the required permissions to view the files attached to this post.
Built:
4 36" dual 3015LF Titan 48's
Future build:
4 MORE Dual Loaded Titan 48's 3015LF 36" wide
6 Dr 280's Currently in build
Powered by: Titans - I-tech 8000
(2) XTI - 4000'S
http://www.mrdjpk.com
4 36" dual 3015LF Titan 48's
Future build:
4 MORE Dual Loaded Titan 48's 3015LF 36" wide
6 Dr 280's Currently in build
Powered by: Titans - I-tech 8000
(2) XTI - 4000'S
http://www.mrdjpk.com
-
Gregory East
- Posts: 3495
- Joined: Sat May 13, 2006 9:56 pm
Re: Amp Rack Back Panel
Nice and clean. I still couldn't trust "helping" hands to not mix up subs and tops outputs 
BAT10, Bad Auto Tuba. Reverse folded TAT to fit JBL 1014D, 350W driver, voltage limit unknown.
-
UROK
Re: Amp Rack Back Panel
Very nice! 
Colour coding makes it (almost) idiot proof!
You find it easier on the back than on the front?
(I was thinking about doing something similar for audio i/ps and o/ps on the front of my amp rack and putting an electrical socket strip and breakout box on the back.)
Colour coding makes it (almost) idiot proof!
You find it easier on the back than on the front?
(I was thinking about doing something similar for audio i/ps and o/ps on the front of my amp rack and putting an electrical socket strip and breakout box on the back.)
Re: Amp Rack Back Panel
im thinking about that i may change it to the front but i have so much traffic in my DJ BOOTH i wanted it out the way of the ladies 
heres a few pics of why i do this last but not least
heres a few pics of why i do this last but not least
You do not have the required permissions to view the files attached to this post.
Built:
4 36" dual 3015LF Titan 48's
Future build:
4 MORE Dual Loaded Titan 48's 3015LF 36" wide
6 Dr 280's Currently in build
Powered by: Titans - I-tech 8000
(2) XTI - 4000'S
http://www.mrdjpk.com
4 36" dual 3015LF Titan 48's
Future build:
4 MORE Dual Loaded Titan 48's 3015LF 36" wide
6 Dr 280's Currently in build
Powered by: Titans - I-tech 8000
(2) XTI - 4000'S
http://www.mrdjpk.com
Re: Amp Rack Back Panel
Are your subs being used as a daggering station there? 
Also great idea, I need to start getting things all neat and tidy.
Also great idea, I need to start getting things all neat and tidy.
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
Re: Amp Rack Back Panel
lol pretty muchAre your subs being used as a daggering station there?
it really helps it took about 10 min off set upAlso great idea, I need to start getting things all neat and tidy.
Built:
4 36" dual 3015LF Titan 48's
Future build:
4 MORE Dual Loaded Titan 48's 3015LF 36" wide
6 Dr 280's Currently in build
Powered by: Titans - I-tech 8000
(2) XTI - 4000'S
http://www.mrdjpk.com
4 36" dual 3015LF Titan 48's
Future build:
4 MORE Dual Loaded Titan 48's 3015LF 36" wide
6 Dr 280's Currently in build
Powered by: Titans - I-tech 8000
(2) XTI - 4000'S
http://www.mrdjpk.com
-
jswingchun
- Posts: 1073
- Joined: Fri Dec 01, 2006 9:43 am
- Location: Cedar Rapids, Iowa
- Contact:
Re: Amp Rack Back Panel
I have a similar setup. I used parts from audiopile.net to construct my own. I used a label maker to label all inputs and outputs. You are right, it does save a lot of time, and it allows the "less technical" helpers to get it right the first time. 
Omni 10
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
-
LelandCrooks
- Posts: 7242
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Amp Rack Back Panel
What the amp rack, or the girls hanging on your Jack stack?jswingchun wrote:I have a similar setup.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
-
jswingchun
- Posts: 1073
- Joined: Fri Dec 01, 2006 9:43 am
- Location: Cedar Rapids, Iowa
- Contact:
Re: Amp Rack Back Panel
Just the amp rack.LelandCrooks wrote:What the amp rack, or the girls hanging on your Jack stack?jswingchun wrote:I have a similar setup.
Generally, hot girls are an endangered species at the kinds of shows we play.
Omni 10
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Re: Amp Rack Back Panel
I went to hear DJPK and a Yoga Class broke outdjpk wrote:
Dude, you got some wild party going on there.
So, lets hear your reviews. What do you think of the Dual Loaded T48's? You get very many comments from the crowd, and your friends? What was the overall impression? Oh, and nice build
Currently Built:
4 T39 24" 3012LF
4 WH10 2510
4 DR200 Pro 8a
4 DR250 2510
**************
4 T39 24" 3012LF
4 WH10 2510
4 DR200 Pro 8a
4 DR250 2510
**************
-
jswingchun
- Posts: 1073
- Joined: Fri Dec 01, 2006 9:43 am
- Location: Cedar Rapids, Iowa
- Contact:
Re: Amp Rack Back Panel
Okay, I can't be the only person wondering what's going on in this pic...djpk wrote:
Omni 10
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Re: Amp Rack Back Panel
It's a chiropractic adjustment!jswingchun wrote:Okay, I can't be the only person wondering what's going on in this pic...djpk wrote:
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice
Re: Amp Rack Back Panel
A career change sounds attractive all of a sudden.
-
Gregory East
- Posts: 3495
- Joined: Sat May 13, 2006 9:56 pm
Re: Amp Rack Back Panel
Simulated delivery of special treat.
BAT10, Bad Auto Tuba. Reverse folded TAT to fit JBL 1014D, 350W driver, voltage limit unknown.
Re: Amp Rack Back Panel
wow a heard of [36" dual 3015LF] must be massive and hardcore brutal.