BEHRINGER iNUKE NU3000

Message

Chris Betancourt · Wed Sep 28, 2011 12:36 pm

Have your tried the amp for mids and highs???

tcorder · #47 Post by **tcorder** » Wed Sep 28, 2011 4:49 pm

No, just on the CDs. The mids are already well catered for and it's a PITA to swap it all over.

Crispin · #48 Post by **Crispin** » Tue Oct 04, 2011 5:01 pm

Dave Non-Zero wrote:Anyone know the actual RMS power ratings on these amps? It seems up in the useable territory.

Yes, I asked at Behringer and got this answer:

NU3000 - approx 580W RMS @ 4 ohms per channel
NU3000 - approx 310W RMS @ 8 ohms per channel

bassmonster · #49 Post by **bassmonster** » Tue Oct 04, 2011 5:27 pm

Hmm, 580w RMS at 4 ohms? If that's true, that's not bad at all for the price.

bassmonster · #50 Post by **bassmonster** » Tue Oct 04, 2011 7:54 pm

Question, would this amp be enough to sufficiently power two otop 12's beta 12a-2 loaded on one channel and two t30 lab 12 loaded on the other channel?

el_ingeniero · #51 Post by **el_ingeniero** » Wed Oct 05, 2011 1:48 pm

bassmonster wrote:Question, would this amp be enough to sufficiently power two otop 12's beta 12a-2 loaded on one channel and two t30 lab 12 loaded on the other channel?

prolly enough for the Otops, but wouldn't put the T30s as hard as they could go.

bassmonster · #52 Post by **bassmonster** » Wed Oct 05, 2011 2:00 pm

el_ingeniero wrote:
bassmonster wrote:Question, would this amp be enough to sufficiently power two otop 12's beta 12a-2 loaded on one channel and two t30 lab 12 loaded on the other channel?
prolly enough for the Otops, but wouldn't put the T30s as hard as they could go.

All the magic happens in the first 100w though right?

bzb · #53 Post by **bzb** » Wed Oct 05, 2011 2:23 pm

About same specs as XTi 1000... on the T39s/T30s it's just not enough voltage to take advantage of the 3012LF/Lab12.

IIRC, 100W to 450W is ~6dB. A good chunk of "loudness" you're missing out on when you get up there.

tcorder · #54 Post by **tcorder** » Sun Nov 20, 2011 8:49 am

It's still working!

Dave Non-Zero · #55 Post by **Dave Non-Zero** » Sun Nov 20, 2011 9:30 am

I used one the other night to run a couple of kickbins. Didn't have the juice really. But I'm really tempted to buy a couple for a light weight monitor rack. Can't believe how lightit is! One finger light!

tcorder · #56 Post by **tcorder** » Sun Nov 20, 2011 6:20 pm

When I first took mine out of the box it felt as though the case was empty, it's that light.

subharmonic · #57 Post by **subharmonic** » Mon Nov 21, 2011 10:34 pm

bassmonster wrote: All the magic happens in the first 100w though right?

Unless you want headroom. If you need to push your amp hard just to get to regular volumes then that is not the amp you want.

Gregory East · #58 Post by **Gregory East** » Tue Nov 22, 2011 2:47 am

Yes the magic happens with the first 100W, but you need another 300W to get 6dB of headroom. Or twice as many cabs and two amps.

tcorder · #59 Post by **tcorder** » Wed Dec 14, 2011 6:03 pm

Still working.

tcorder · #60 Post by **tcorder** » Fri Jan 20, 2012 7:48 am

I'm glad to report that it's still working well.

BillFitzmaurice.info

BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000

Re: BEHRINGER iNUKE NU3000