I have been bowling a ton recently, going back to school, and snow skiing.
I successfully prototyped and tested a pair of WiRay10 tops, Monomer has heard them. Ran out of money and had to shelve the project.
The Dubhorn is an 18hz corner horn with a 10" driver, a 6 pack will take 3kw and do 140db 18hz up corner loaded.
Both the Dubhorn and WiRay project are on hold until I get the funding to continue.
Sounds good that you're still going at it; let us know once you get everything teh way you want. Funny thing that you started this because you needed more extension while I've been trying to get something because I'm trying to get less - go figure
Test four so far (waiting on a driver for one, glue was drying on the other)
Found a lot of air leaks, most on the driver cover.
They've never sounded like this. With just four hooked up and running <10vac, it was pounding. I didn't have the DSP at the shop, nor did I have them set up right for that room.
I know why 50Hz on up was suffering, the air leaks killed it!
The driver needs to get here, I wanna fire up all six!
-AutoTuba; Tang Band 8 inch (x1)
-T39; KappliteLF, 22 wide (x2)
-More to come!
Not perfect room setup, but I think the rig they have there will cover down to 50Hz nice. Finally be able to have the L set lower.
I really dont think they needed me there, make me wonder if the scoops that are installed are crap. Look homebrew, eminence loaded - little bigger the a t39slim, with no center brace (3/4 ply)
-AutoTuba; Tang Band 8 inch (x1)
-T39; KappliteLF, 22 wide (x2)
-More to come!
Not one complaint. Ran everything off of one PL4.0 (yikes!) and it worked just fine. Bass projected nicely - the dancefloor was in the back of the room, bar upfront - along with the hallway entrance.
Just the right amount of bass on the dancefloor. What I liked was 100ft away in the hallway to get in. It was ruthless, low, clean bass. Made it easy for people to find the place.
Pics to come, waiting for them to get posted.
-AutoTuba; Tang Band 8 inch (x1)
-T39; KappliteLF, 22 wide (x2)
-More to come!
Not one complaint. Ran everything off of one PL4.0 (yikes!) and it worked just fine. Bass projected nicely - the dancefloor was in the back of the room, bar upfront - along with the hallway entrance.
Just the right amount of bass on the dancefloor. What I liked was 100ft away in the hallway to get in. It was ruthless, low, clean bass. Made it easy for people to find the place.
Pics to come, waiting for them to get posted.
nice one dude!
-1 for thought terminating cliches.
Built and/or own:
8 x T48 24" 3015LF
6 x DR280
2 x DR250 old style beta10
2 x T36s 20" delta15L
1 x TAT
1 x dual Lab12 30" T60
It just me or does anyone else think that every build/gig pic should include more half naked slutty dancing girls on top of the cabs? They look MUCH better.
I second the motion to replace the unused space in the T60 with a removable strip pole! Like this, there would be no question as to whether they can or can not dance on top of them; it would be mandatory.
SeisTres wrote:
I second the motion to replace the unused space in the T60 with a removable strip pole! Like this, there would be no question as to whether they can or can not dance on top of them; it would be mandatory.
hmm i might try that. I knew i used 3/4 ply for the side panels for a reason!
-1 for thought terminating cliches.
Built and/or own:
8 x T48 24" 3015LF
6 x DR280
2 x DR250 old style beta10
2 x T36s 20" delta15L
1 x TAT
1 x dual Lab12 30" T60
SeisTres wrote:It just me or does anyone else think that every build/gig pic should include more half naked slutty dancing girls on top of the cabs? They look MUCH better.
I second the motion to replace the unused space in the T60 with a removable strip pole! Like this, there would be no question as to whether they can or can not dance on top of them; it would be mandatory.
I was worried about on of them falling.
There was no drinking at the bar (Christmas and all) I'm sure plenty of other substances were around.
stripper poles...great idea.
-AutoTuba; Tang Band 8 inch (x1)
-T39; KappliteLF, 22 wide (x2)
-More to come!
There was no drinking at the bar (Christmas and all)
They ban the sale of alcohol on Christmas from 11:59 the eve of, until 7am the next day. This includes serving. I do believe this is state-ran, and varies state-to-state.
Now that I think of it, the venue only has a juice bar - no liquor license.
Waiting on a callback, they might rent the tht's for tomorrow. Easy money, as everything's still setup.
-AutoTuba; Tang Band 8 inch (x1)
-T39; KappliteLF, 22 wide (x2)
-More to come!
