Hey,
I've found 12mm Russian Birch, 5 X 5 sheets from a lumber shop recommended to me by a local cabinet maker. It looks like it's got nine plies to me...should that be OK?..it looks really, really nice and it's about $31 5 X 5' per sheet.
Donny
Russian Birch Question
Russian Birch Question
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Re: Russian Birch Question
Yep, thats the stuff 
Currently Built:
4 T39 24" 3012LF
4 WH10 2510
4 DR200 Pro 8a
4 DR250 2510
**************
4 T39 24" 3012LF
4 WH10 2510
4 DR200 Pro 8a
4 DR250 2510
**************
-
Harley
- Posts: 5758
- Joined: Mon May 08, 2006 2:45 pm
- Location: Christchurch, New Zealand - Authorised BFM Cab Builder
Re: Russian Birch Question
If the plies are all even thickness, you're on the money! 
Semi-retired: Former Australia and New Zealand Authorised BFM cab builder.Re: Russian Birch Question
OK...this does look like the right wood. This is a vast improvement over what I used on my first practice box.
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW