It's the result of the earthquake in Chile, the high ground where the pines grows was one of the most damaged, (roads and infrastructure, not the pines by itself) and they are rebuilding the towns with ply houses, so the arauco will back but not in this year.SeisTres wrote:I checked lowes as was thinking about buying a sheet of Arauco and Lo and Behold! I could not find itAnd I just don't mean in my store, I mean in their inventory! Now actually HD carries arauco but it's 23/32.
Does this mean we will not be able to get arauco anymore?
I guess now I'll have to use BB for my dr's too
Is anyone coming up with the same results, or is it just my area???
Where is the Arauco???
Re: Where is the Arauco???
¿TEQUILA?...
-
jswingchun
- Posts: 1073
- Joined: Fri Dec 01, 2006 9:43 am
- Location: Cedar Rapids, Iowa
- Contact:
Re: Where is the Arauco???
Interesting, glad I don't have any projects on the board right now.djwoo wrote:It's the result of the earthquake in Chile, the high ground where the pines grows was one of the most damaged, (roads and infrastructure, not the pines by itself) and they are rebuilding the towns with ply houses, so the arauco will back but not in this year.
Omni 10
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Re: Where is the Arauco???
just found 5x5 Baltic Birch for 24 dollars a sheet woohoo.
I'm surprised it's taken so long for this shortage to hit us. I considered stocking up on arauco right after the earthquake, but unfortunatly never did.
I'm surprised it's taken so long for this shortage to hit us. I considered stocking up on arauco right after the earthquake, but unfortunatly never did.
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
Re: Where is the Arauco???
Good thing, as I imagine that by the time you actually used the arauco, it would actually be so warped that you wouldn't need the bendy ply for the back of the dr'ssine143 wrote:
I'm surprised it's taken so long for this shortage to hit us. I considered stocking up on arauco right after the earthquake, but unfortunatly never did.
You'll be glad once you start working with BB, it's extremely nice. However, I found the durability of the arauco more than acceptable and now I just see no need to use BB as it is much heavier. Carrying around my 16 t39's is manageable, but TRYING to carry the 16" TT made from BB was total crap. And remember that I pay $22, so almost paying the same for both of those.
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub
Re: Where is the Arauco???
Lowes in Mansfield sell them and a store off Hampton in Dallas.
I just look at the inventory for the one in Dallas, of Hampton, got over 40 sheets in stock.
LOWE'S OF S.W. Dallas
8520 SOUTH HAMPTON RD.
DALLAS, TX
(972) 228-2880
I just look at the inventory for the one in Dallas, of Hampton, got over 40 sheets in stock.
LOWE'S OF S.W. Dallas
8520 SOUTH HAMPTON RD.
DALLAS, TX
(972) 228-2880