Where is the Arauco???

Helpful hints on how to build 'em, and where to get the stuff you need.
Message
Author
SeisTres
Posts: 2688
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Where is the Arauco???

#1 Post by SeisTres »

I checked lowes as was thinking about buying a sheet of Arauco and Lo and Behold! I could not find it :confused: And I just don't mean in my store, I mean in their inventory! Now actually HD carries arauco but it's 23/32.

Does this mean we will not be able to get arauco anymore? :cry:

I guess now I'll have to use BB for my dr's too :wall:

Is anyone coming up with the same results, or is it just my area???
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

Billy Joe
Posts: 53
Joined: Thu Apr 01, 2010 6:30 pm
Location: Arizona

Re: Where is the Arauco???

#2 Post by Billy Joe »

I just checked the Lowes here, and they don't have it either. I am getting ready to build an Autotuba, so now what.
2xTHT
AutoTuba
XF212
T18
Table Tuba

SeisTres
Posts: 2688
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Re: Where is the Arauco???

#3 Post by SeisTres »

Billy Joe wrote:I just checked the Lowes here, and they don't have it either. I am getting ready to build an Autotuba, so now what.
since it's not fro pro sound, mdf is actually pretty ok. Easier to spilt or crumble but it does fine for speakers and the finish is really quite nice. It is also a little cheaper. Just remember to paint it and protect it from humidity as they do not play well at all :(

OH yeah, and just make the spacer ring from something that's more solid.
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

Billy Joe
Posts: 53
Joined: Thu Apr 01, 2010 6:30 pm
Location: Arizona

Re: Where is the Arauco???

#4 Post by Billy Joe »

I was think'in mdf, but was worried about splitting the edges. May use it anyway.
2xTHT
AutoTuba
XF212
T18
Table Tuba

SeisTres
Posts: 2688
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Re: Where is the Arauco???

#5 Post by SeisTres »

if you drill pilot holes this is not a problem. However, you do have to be careful if using a drill as it will easily overturn (I have no idea what's the correct term for this). That and also the mdf dust sucks.
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

User avatar
Tom Smit
Posts: 7596
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Where is the Arauco???

#6 Post by Tom Smit »

-1 on MDF. Go for a five-ply spruc/pine/fir instead. (with the usual void-free layers.....)
TomS

WB
Posts: 1745
Joined: Sat May 13, 2006 3:06 pm
Location: Ontario. Yours To Discover

Re: Where is the Arauco???

#7 Post by WB »

Tom Smit wrote:-1 on MDF
+1 on the -1
Tomorrow I'm going to stop procrastinating - WB

User avatar
Rick Lee
Posts: 1236
Joined: Wed Jul 09, 2008 3:01 pm
Location: Tullahoma, Tennessee

Re: Where is the Arauco???

#8 Post by Rick Lee »

Lowes here in middle Tennessee has it.
Authorized Builder
Nashville/Middle Tennessee

bwtaudio@gmail.com

User avatar
tdogg
Posts: 468
Joined: Sun Jan 03, 2010 9:41 pm
Location: MN, USA

Re: Where is the Arauco???

#9 Post by tdogg »

lowes in Minnesota has it for about $35 per sheet :shock: . Menards has Aruaco for $25 each, but im guessing you dont have menard's stores in TX. at my local stores, a sheet of MDF is about the same price. im planning on building an autotuba out of MDF only because i have a bunch of scraps that i got for free. if i was buying materials i would get aruaco.
Jack 112 deltalite 2512 x2

in progress: 24" T39 3012LF loaded, for bass guitar and PA use

User avatar
jswingchun
Posts: 1073
Joined: Fri Dec 01, 2006 9:43 am
Location: Cedar Rapids, Iowa
Contact:

Re: Where is the Arauco???

#10 Post by jswingchun »

That would suck if Lowes quit carrying Arauco.
Omni 10
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)

User avatar
camrynekai
Posts: 367
Joined: Wed Aug 30, 2006 9:59 am
Location: Burnt Hills N.Y.

Re: Where is the Arauco???

#11 Post by camrynekai »

Funny thing is, where I live they have never offered it...have 6 stores near me and they all look @ me like I have 3 heads when I ask if they have any Arauco plywood.
Facebook Page
More Bass then Fitzmaurice??? Click here
My herd of T48's

Cabs built
14- 24" T48's 3015LF's
6- OTop 2X12's W/Straight array's
4- OTop 12's W/melded array's
2- OTop 12's W/Straight array's
2- 29" Sla Pro's
1- Auto tuba ITW

SeisTres
Posts: 2688
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Re: Where is the Arauco???

#12 Post by SeisTres »

I guess my area just stopped carrying in it :( I was hoping to get some more for my dr's...oh well, BB will have to do.
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

User avatar
doncolga
Posts: 1967
Joined: Thu Jul 01, 2010 3:01 pm
Location: Statesboro, GA
Contact:

Re: Where is the Arauco???

#13 Post by doncolga »

camrynekai wrote:Funny thing is, where I live they have never offered it...have 6 stores near me and they all look @ me like I have 3 heads when I ask if they have any Arauco plywood.
+1
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW

User avatar
Zack Brock
Posts: 1124
Joined: Sun Oct 07, 2007 1:06 am
Location: Northeast Florida
Contact:

Re: Where is the Arauco???

#14 Post by Zack Brock »

It has never been available here in Northeast Florida either. I went as far to check Georgia and Alabama stores, no such luck.
Zack Brock
Authorized Builder, Northeast Florida (Greater Jacksonville Area)
WavePulse Acoustics | zackbrock@macpulse.com | http://www.bestbasscabs.com/

User avatar
jswingchun
Posts: 1073
Joined: Fri Dec 01, 2006 9:43 am
Location: Cedar Rapids, Iowa
Contact:

Re: Where is the Arauco???

#15 Post by jswingchun »

camrynekai wrote:Funny thing is, where I live they have never offered it...have 6 stores near me and they all look @ me like I have 3 heads when I ask if they have any Arauco plywood.
I know that look, I got it when I asked for stucco lath at Lowes.
Omni 10
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)

Post Reply