Hey,
I've got a local woodworking shop that may precut cut all my parts so I could assemble. Is that a smart thing to do? I remember reading somewhere in the plans about fitting as you go...
Thanks!
Donny
Precut Parts?
Precut Parts?
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
-
Bill Fitzmaurice
- Site Admin
- Posts: 28916
- Joined: Tue May 02, 2006 5:59 pm
Re: Precut Parts?
doncolga wrote:Hey,
I've got a local woodworking shop that may precut cut all my parts so I could assemble. Is that a smart thing to do?
I remember reading somewhere in the plans about fitting as you go...
Re: Precut Parts?
Thanks!Bill Fitzmaurice wrote:doncolga wrote:Hey,
I've got a local woodworking shop that may precut cut all my parts so I could assemble. Is that a smart thing to do?I remember reading somewhere in the plans about fitting as you go...
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Re: Precut Parts?
If you're building subs, having the shop rip the inner panels is a real time saver. And you might get away with them cutting the rough sizes of the panels with you having to do angles and the final trimming, but actually cutting them exactly to size is something i'd skip.
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub