What's to chat about?

Anything not covered elsewhere.
Message
Author
Bruce Weldy
Posts: 7738
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: What's to chat about?

#1081 Post by Bruce Weldy » Fri Sep 24, 2021 8:19 pm

Seth wrote:
Wed Sep 22, 2021 9:25 pm
...there's really very little reason to build a horn sub if they didn't have the benefit of high sensitivity...
Grant Bunter wrote:
Fri Sep 24, 2021 4:27 pm



Because they're horns, the same or more output with less power, ie increased efficiency.

Do you find the two emboldened phrases mean different things?
Read the first quote more carefully. He said IF horns weren't more sensitive, there would be no reason to build them. The second statement supports the first.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Grant Bunter
Posts: 6628
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: What's to chat about?

#1082 Post by Grant Bunter » Fri Sep 24, 2021 9:55 pm

Tomateo, tomarto, tomato, round red fleshy thing you slice up and eat on sandwiches.

I'm not disagreeing, certainly not disagreeing to disagree. I'm not purposefully doing anything other than trying to discuss stuff. I'm just writing it my own way, upside down, in Aussie english.

Why is it simply not enough for me to say I knew next to nothing, or close to nothing, or nothing in particular, about horns, their extra sensitivity, or any of that when i got here.
I certainly didn't know when I got here that sensitivity equals blah blah blah,
The Simplexx line didn't exist, all that was on offer was horns.
The T45, the truck tuba, the smaller SLA's, the Otop8, didn't exist either.

And, I'm at a loss to explain how one line out of each thing I write, gets pulled out (+/- put up in bold) and becomes the focus, compared to everything else I wrote in that post. WTF.

I'm done...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" BP102 , 2 x 28" 3012lf.
WH8: x 3 with melded array.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
AntonZ
Posts: 2588
Joined: Sun May 14, 2006 6:00 am
Location: NL

Re: What's to chat about?

#1083 Post by AntonZ » Wed Sep 29, 2021 11:58 am

Seth wrote:
Fri Sep 24, 2021 7:51 pm
Monty Python, Holey Grail...
"Tis but a scratch"
"A scratch?! You're arm's off!"
'No it isn't"
"What's that then?"
I can still bite!!!!
:owned:

User avatar
Seth
Posts: 1901
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: What's to chat about?

#1084 Post by Seth » Fri Oct 01, 2021 6:42 am

AntonZ wrote:
Wed Sep 29, 2021 11:58 am
Seth wrote:
Fri Sep 24, 2021 7:51 pm
Monty Python, Holey Grail...
"Tis but a scratch"
"A scratch?! You're arm's off!"
'No it isn't"
"What's that then?"
I can still bite!!!!
:owned:
WHAT... is the airspeed of an unladen swallow?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Rich4349
Posts: 728
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: What's to chat about?

#1085 Post by Rich4349 » Fri Oct 01, 2021 11:33 am

Here ya go Seth. I think you'd have a lot to talk about with StyroPyro, the laser boy genius. He does go on a bit long with the cooking jokes, but his understanding of electronics and chemistry is admirable. No, DON'T try this yourself at home.

https://www.youtube.com/watch?v=fM9hYzJnao0
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

User avatar
AntonZ
Posts: 2588
Joined: Sun May 14, 2006 6:00 am
Location: NL

Re: What's to chat about?

#1086 Post by AntonZ » Sat Oct 02, 2021 3:38 am

Seth wrote:
Fri Oct 01, 2021 6:42 am
WHAT... is the airspeed of an unladen swallow?
What do you mean? An African or a European swallow?

User avatar
Seth
Posts: 1901
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: What's to chat about?

#1087 Post by Seth » Sun Oct 03, 2021 11:07 am

Hahaha. Too funny. Thanks for playing along Anton :thumbsup:
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

User avatar
Seth
Posts: 1901
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: What's to chat about?

#1088 Post by Seth » Mon Oct 04, 2021 6:58 pm

Alright... without googling, who can come up with the line following this... I bet you can't without cheating LOL :D


"It's raining inside a big brown moon. How does that mess you, baby up leg"...

Even if you cheat... glad you got to rock out to a rare classic. :thumbsup:
Last edited by Seth on Mon Oct 04, 2021 9:57 pm, edited 1 time in total.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

User avatar
Tom Smit
Posts: 7151
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: What's to chat about?

#1089 Post by Tom Smit » Mon Oct 04, 2021 8:56 pm

I had to cheat. I don't ever remember hearing that one.
TomS

User avatar
Seth
Posts: 1901
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: What's to chat about?

#1090 Post by Seth » Mon Oct 04, 2021 10:06 pm

Tom Smit wrote:
Mon Oct 04, 2021 8:56 pm
I had to cheat. I don't ever remember hearing that one.
Glad you got to rock out to a (new to you) rare classic Tom. I came across this song about 5 years ago in a search for some groovy 60's tunes. I hadn't heard it either and was surprised I hadn't. It totally deserves more air time/attention.

You're welcome :D
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Bruce Weldy
Posts: 7738
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: What's to chat about?

#1091 Post by Bruce Weldy » Tue Oct 05, 2021 7:59 am

Seth wrote:
Mon Oct 04, 2021 10:06 pm
Tom Smit wrote:
Mon Oct 04, 2021 8:56 pm
I had to cheat. I don't ever remember hearing that one.
Glad you got to rock out to a (new to you) rare classic Tom. I came across this song about 5 years ago in a search for some groovy 60's tunes. I hadn't heard it either and was surprised I hadn't. It totally deserves more air time/attention.

You're welcome :D
I tried finding it and had no luck......how about a link to it?

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Seth
Posts: 1901
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: What's to chat about?

#1092 Post by Seth » Tue Oct 05, 2021 9:37 am

Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Bruce Weldy
Posts: 7738
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: What's to chat about?

#1093 Post by Bruce Weldy » Tue Oct 05, 2021 10:33 am

Seth wrote:
Tue Oct 05, 2021 9:37 am
https://youtu.be/cWEu9Rn-PaE
Wow, I haven't heard that song in decades! But, I do remember it.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

CarterKraft
Posts: 77
Joined: Thu Oct 22, 2020 1:46 pm
Location: DFW

Re: What's to chat about?

#1094 Post by CarterKraft » Tue Oct 05, 2021 1:55 pm

I prefer the video of this one
https://www.youtube.com/watch?v=hP3OJUk001k

Bruce Weldy
Posts: 7738
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: What's to chat about?

#1095 Post by Bruce Weldy » Tue Oct 05, 2021 2:40 pm

CarterKraft wrote:
Tue Oct 05, 2021 1:55 pm
I prefer the video of this one
https://www.youtube.com/watch?v=hP3OJUk001k
Oh, but the all-time great was this one......

https://www.youtube.com/watch?v=ztmoPIG ... eHouseInc.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Post Reply