BillFitzmaurice.info

I had a few feet of 1x4 popular left over and made a box to protect the bash amp.
FYI: Where the volume knob is set in the picture shakes the whole house.

Hello all. Nice work so far ncgrove. I am getting ready to start a build of two DR250s, and would like some advice on how much 1/2 and 1/8 ply to purchase. I don't see that specified in the plans as it was for the THT. Secondly, has anyone put together a cut list for the 250? With so many odd shaped...

I was looking for info on the iNuke series of amps and ran across this technical review. Compares iNuke NU6000 with Kam KXD7200.
http://forum.speakerplans.com/behringer ... 69202.html

Looking good! These drivers are excellent. Word to the wise - the gaskets on those drivers are in 4 pieces.... and in my experience they leak... in all 4 places! WTF? Ridiculous idea. You'll (more than likely)need to seal the gasket gaps to prevent leaks. I just had the same issue. Caulking took ca...

The construction is complete. Still need to do the finish work. When hooked up to the bash 300 I can't get the volume above 30% before there is too much noise from heater vents and things hanging on the wall and who knows what else. I am quite impressed, especially considering I used the cheapest ($...

Hello all. I got the baffle and the braces behind it installed today. Had to wait on the driver to arrive to measure it properly. I have a question on mounting the driver. The gasket around the driver is like 1/2 - 5/8 thick. How much do I compress that when I install the driver?

Ken

OK, so sometimes what I read is not the same as what is printed on the page... Bill's plans refer to allen head screws and lock washers. I read machine screws and nuts. Wood screws and lock washers sound much simpler.
I installed a couple more panels on Sunday.

Does anyone have some advice on T-nuts? Bill's instructions call for machine screws, lock washers and nuts. If I am understanding the plans correctly, then there would be no way to get the driver out after cabinet was completed. I found locking http://images2.mcmaster.com/Contents/gfx/small/93766a30...

I have built other things, but I just got the DIY speaker bug and this is my first one.

Starting my first BF speaker. THTLP. 18" by 24". This post should be first.

Starting my first BF speaker. THTLP. 18" by 24". I got my photos out of order. This post should be second.