How-To Do RTA
Posted: Tue Jul 07, 2009 12:53 pm
I'm starting this thread to encourage owners of the popular DBX and Behringer boxes to post their process for using the RTA built into their hardware.
Page 1 of 1
Re: How-To Do RTA
Posted: Tue Jul 07, 2009 1:50 pm
When I get the DBX Drive Rack 4800 in, I'll let you all know how it goes.
Re: How-To Do RTA
Posted: Tue Jul 07, 2009 2:55 pm
Re: How-To Do RTA
Posted: Wed Jul 08, 2009 10:33 am
That was some good reading. Great tip on checking phase of the entire system. DIY guys usually have an eye for detail but fatigue can leave the easy things overlooked.Re: How-To Do RTA
Posted: Wed Jul 08, 2009 6:34 pm
Will this be open for SMAART users as well Bruce?
Re: How-To Do RTA
Posted: Wed Jul 08, 2009 9:17 pm
I'm always open to learning something. SMAART isn't in my future, but some lessons are good.
The thread was originally opened on behalf of a new member with an active management box.
He wanted to know how to use the RTA functions.
My experience is in-depth with software analyzers, laptops, soundcards, etc.
I have zilch for SMAART, DBX, or the various hand-helds.
The thread was originally opened on behalf of a new member with an active management box.
He wanted to know how to use the RTA functions.
My experience is in-depth with software analyzers, laptops, soundcards, etc.
I have zilch for SMAART, DBX, or the various hand-helds.