Page 1 of 1
CASTERS FOR T39
Posted: Sun Nov 23, 2025 10:26 pm
by Joman116
Hi team,
I have a pair of 20" T39s I bought used and the casters need replacement. See images, can you guys help guide me on a more robust Caster model /install guidance?
Re: CASTERS FOR T39
Posted: Tue Dec 02, 2025 5:19 pm
by Joman116
BUMP
Anyone? I believe these are called "tilt/recessed" casters?
Re: CASTERS FOR T39
Posted: Tue Dec 02, 2025 5:50 pm
by Bill Fitzmaurice
Check Penn Elcom.
Re: CASTERS FOR T39
Posted: Wed Dec 03, 2025 12:54 am
by Joman116
Looks like the part I currently have on there is W2060K. Any other alternative that's a worthy upgrade?
Would the 3" offset the sitting alignment?
Re: CASTERS FOR T39
Posted: Wed Dec 03, 2025 2:27 pm
by Rich4349
Just look around here and pick a beefier model. Replace both for future proofing and symmetry in rolling.
https://www.penn-elcom.com/us/flight-ca ... ge-castors
*I* like the looks of this one (tougher design, larger diameter rolls smoother over bumps etc), though the inner wheel housing width might require you to open up the currently vacant space a bit. You'll also have to make sure to keep the horn path integrity intact and not let any air move through whatever modification you may have to do.
https://www.penn-elcom.com/us/3-1-8in-h ... -w2080k-hd