OmniTop 12 build
-
- Posts: 176
- Joined: Tue Dec 20, 2011 8:11 pm
Re: OmniTop 12 build
All done it’s current resting place
I have the most redneck grill ever lol
Joe
I have the most redneck grill ever lol
Joe
-
- Posts: 176
- Joined: Tue Dec 20, 2011 8:11 pm
-
- Posts: 176
- Joined: Tue Dec 20, 2011 8:11 pm
Re: OmniTop 12 build
Charts! With the mic right in the mouth and again at 1m away. I'm not very far away from the garage so I'm thinking there are some reflections in there. But with the mic right at the mouth it's looking like the published charts so I'm pretty psyched
Joe
Joe
Re: OmniTop 12 build
It's amazing sometimes, how easy and effective it is to make oopsies disappear, like they were never there in the first place. Well doneFastskiguy wrote: ↑Mon May 08, 2023 8:04 pm I came up a bit short on the bottom edge and glued on a thin strip of plywood. Hit it with the router and Duratex and it turned out ok. Just wanted to throw in a little something….it is a build thread after all.
Joe
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 176
- Joined: Tue Dec 20, 2011 8:11 pm
Re: OmniTop 12 build
I tell you what, that duratex is just amazing stuff. Easy to work with, easy to clean, looks pretty good, covers up a multitude of defects, dries fast, 1 little pail goes a long way, the little rollers are cheap, dries hard as a rock. I've heard from more than one old timer in the woodshop that it's not about making the perfect thing, it's about perfectly fixing the blunders that inevitably come along during any build of anything.
Joe
Joe
-
- Posts: 176
- Joined: Tue Dec 20, 2011 8:11 pm
Re: OmniTop 12 build
^^
I've had four 30" wide T39's and four DR200's in my storage unit for a couple years that look just like that. One of these days, maybe I'll get around to assembling them! One thing's for certain... they definitely take up less space in a pile like that! LOL
Loving your progress!
I've had four 30" wide T39's and four DR200's in my storage unit for a couple years that look just like that. One of these days, maybe I'll get around to assembling them! One thing's for certain... they definitely take up less space in a pile like that! LOL
Loving your progress!
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: OmniTop 12 build
That would do my head in man, can't you hear them calling you?
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
-
- Posts: 176
- Joined: Tue Dec 20, 2011 8:11 pm