Going to build the Tuba Low Profile. I’m wondering if it would be possible to use 2 12 inch drivers. I have a few of the Dayton Ultimax 12s
Just a curious newby asking newby questions
I also have a couple of the Dayton 15” (recommended) drivers.
HT Tuba LP Possible to use 2-12” drivers?
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: HT Tuba LP Possible to use 2-12” drivers?
Possible, but two smaller cabs will work better than one larger one.
Re: HT Tuba LP Possible to use 2-12” drivers?
Yes. However, it's way more advisable to build 2 single loaded cabs.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 3
- Joined: Tue Jan 10, 2023 10:42 am
Re: HT Tuba LP Possible to use 2-12” drivers?
That’s what I figured. I appreciate the responses!