Melded array reinforcement

Helpful hints on how to build 'em, and where to get the stuff you need.
Post Reply
Message
Author
User avatar
fender3x
Posts: 647
Joined: Mon May 15, 2006 11:51 am
Location: miami

Melded array reinforcement

#1 Post by fender3x »

I had an idea, and am wondering why I have not seen it done by others. If this is a bad idea, hoping others will talk me off the ledge.
reinforcement.jpg
I was thinking about using the cutoff pieces from the sides of the tweeter to reinforce the back, sort of like I have arranged them in the pic (note: nothing has been glued yet in the pic). The side-cutoffs could be glued on and then slurry'd into place using acetone/abs slurry. It seems to me that would make the array a fair bit stiffer. Since I don't have anything else to do with the cutoffs, any reason not to do this?
One man's magic is another man's engineering. --Heinlein

1 x DR250
1 x T39
1 x Omni 10

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28620
Joined: Tue May 02, 2006 5:59 pm

Re: Melded array reinforcement

#2 Post by Bill Fitzmaurice »

Once screwed in place the array doesn't need reinforcement.

User avatar
fender3x
Posts: 647
Joined: Mon May 15, 2006 11:51 am
Location: miami

Re: Melded array reinforcement

#3 Post by fender3x »

Consider me off the ledge. Thanks!
One man's magic is another man's engineering. --Heinlein

1 x DR250
1 x T39
1 x Omni 10

Post Reply