HT setup using T24
Re: HT setup using T24
Yes I have been through this menu. The only speaker that can have cross over adjusted are the main center and surround. The sub only level and distance
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
Re: HT setup using T24
Who has experience with the mini dsp. I see a main board, a input output connector board and an optional interface board to allow more controls via PC . What is the least I need to just do hi and low pass
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
- Bill Fitzmaurice
- Site Admin
- Posts: 28620
- Joined: Tue May 02, 2006 5:59 pm
Re: HT setup using T24
You can't use it with your receiver to high pass. That would require the ability to insert it between the pre-amps and power amps.
Re: HT setup using T24
I am using an external amp for the sub. The LRC and surround is being processed by the Sony. I just need to process the sub
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
- Bill Fitzmaurice
- Site Admin
- Posts: 28620
- Joined: Tue May 02, 2006 5:59 pm
Re: HT setup using T24
You said 'The only speaker that can have cross over adjusted are the main center and surround', with no mention of the L/R. Whatever. For both low passing and EQ I'd use this:
https://www.parts-express.com/Dayton-Au ... er-230-520
It's not user friendly, because the instructions are crap. But I found other subs that use the same control app and their instructions are OK.
https://www.parts-express.com/Dayton-Au ... er-230-520
It's not user friendly, because the instructions are crap. But I found other subs that use the same control app and their instructions are OK.
Re: HT setup using T24
Punctuation to the rescue!
LOL
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
- Bill Fitzmaurice
- Site Admin
- Posts: 28620
- Joined: Tue May 02, 2006 5:59 pm
Re: HT setup using T24
Punctuation matters.
Re: HT setup using T24
Let's eat kids!
Let's eat, kids!
Let's eat, kids!
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102
Re: HT setup using T24
For an old guy I'm falling into bad habits.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
Re: HT setup using T24
Order the Parts Express Dayton Audio device, A little more than I hoped to spend but it should do the trick. 150 Canadian with tax and shipping. The shipping was as much as the unit.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
Re: HT setup using T24
Got the unit and the learning curve is a bit steep due to crappy instructions. But it does the trick.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
Re: HT setup using T24
Works well with iPad but android phone won't seem to connect.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
Re: HT setup using T24
https://hometheaterhifi.com/reviews/aud ... ontroller/
This review and instructions are quite good compared to the instructions with the unit.
This review and instructions are quite good compared to the instructions with the unit.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608
- Bill Fitzmaurice
- Site Admin
- Posts: 28620
- Joined: Tue May 02, 2006 5:59 pm
Re: HT setup using T24
I ended up using the instructions for the Earthquake Sound MiniMe DSP, which uses the same software.