HT setup using T24

Anything not covered elsewhere.
Message
Author
T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: HT setup using T24

#16 Post by T_Gowan »

Yes I have been through this menu. The only speaker that can have cross over adjusted are the main center and surround. The sub only level and distance
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: HT setup using T24

#17 Post by T_Gowan »

Who has experience with the mini dsp. I see a main board, a input output connector board and an optional interface board to allow more controls via PC . What is the least I need to just do hi and low pass
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: HT setup using T24

#18 Post by Bill Fitzmaurice »

You can't use it with your receiver to high pass. That would require the ability to insert it between the pre-amps and power amps.

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: HT setup using T24

#19 Post by T_Gowan »

I am using an external amp for the sub. The LRC and surround is being processed by the Sony. I just need to process the sub
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: HT setup using T24

#20 Post by Bill Fitzmaurice »

You said 'The only speaker that can have cross over adjusted are the main center and surround', with no mention of the L/R. Whatever. For both low passing and EQ I'd use this:

https://www.parts-express.com/Dayton-Au ... er-230-520

It's not user friendly, because the instructions are crap. But I found other subs that use the same control app and their instructions are OK.

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: HT setup using T24

#21 Post by Seth »

Punctuation to the rescue!
T_Gowan wrote: Sat Jul 16, 2022 3:27 pm Yes, I have been through this menu. The only speakers that can have cross over adjusted are the main, center, and surround...
LOL
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: HT setup using T24

#22 Post by Bill Fitzmaurice »

Punctuation matters.

jimbo7
Posts: 849
Joined: Fri Dec 28, 2012 10:45 am
Location: St. Louis

Re: HT setup using T24

#23 Post by jimbo7 »

Let's eat kids!
Let's eat, kids!
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: HT setup using T24

#24 Post by T_Gowan »

For an old guy I'm falling into bad habits.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: HT setup using T24

#25 Post by T_Gowan »

Order the Parts Express Dayton Audio device, A little more than I hoped to spend but it should do the trick. 150 Canadian with tax and shipping. The shipping was as much as the unit.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: HT setup using T24

#26 Post by T_Gowan »

Got the unit and the learning curve is a bit steep due to crappy instructions. But it does the trick.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: HT setup using T24

#27 Post by T_Gowan »

Works well with iPad but android phone won't seem to connect.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: HT setup using T24

#28 Post by T_Gowan »

https://hometheaterhifi.com/reviews/aud ... ontroller/
This review and instructions are quite good compared to the instructions with the unit.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: HT setup using T24

#29 Post by Bill Fitzmaurice »

I ended up using the instructions for the Earthquake Sound MiniMe DSP, which uses the same software.

Post Reply