BillFitzmaurice.info

Looking for the smallest option to get one mic, and one line or a stereo Jack even, mixed together with a line level out.
I’ve seen some really small mixing boards , but have no idea which one to choose.
Just looking for a small option to get signal into my Driverack without getting everything out. Like when I just want to turn on Pandora in the back yard for the kiddos.

Like this would be the bees knees, IF it had line out
https://www.sweetwater.com/store/detail ... lsrc=aw.ds

Possible "outside the box" solution: Sum 2 inputs on the Driverack, one from your audio source and the other from a wireless mic receiver. Maybe? Can the driverack be set to sum 2 inputs?

Oooo I don’t think so, nor would plugging in a mic straight in work either.

Found this, just need to verify it will work without a laptop, since it’s USB based
https://www.sweetwater.com/store/detail ... lsrc=aw.ds

J_Dunavin wrote: ↑Thu Jun 23, 2022 1:23 pm Oooo I don’t think so, nor would plugging in a mic straight in work either.

For $30 more, you can get this one with more inputs....and probably better quality.

https://www.sweetwater.com/store/detail ... nnel-mixer

That does look nice.
Ugh I dunno trying to find a very small solution, like DI box small.

EDIT:
I did call and they said the USB MIX would work as a stand alone mixer. wouldn't need a computer, just a 5V power supply.

So, basically were looking for a 1/2 version of something like this?
https://www.sweetwater.com/store/detail ... line-mixer

If price is a concern (it always is for me), you can likely find small analog mixers on eBay for less, especially if it's used. It'll be a crapshoot quality-wise.

Strange Kevin wrote: ↑Thu Jun 23, 2022 4:47 pm So, basically were looking for a 1/2 version of something like this?
https://www.sweetwater.com/store/detail ... line-mixer

Yes exactly!
That thing is cool… cool price tag too.

Ya ultimately some used thing would work too. I’ve been searching marketplace for ideas…


Edit…
Getting closer
https://www.parts-express.com/Rolls-MX1 ... vPEALw_wcB

J_Dunavin wrote: ↑Thu Jun 23, 2022 6:27 pm

Strange Kevin wrote: ↑Thu Jun 23, 2022 4:47 pm So, basically were looking for a 1/2 version of something like this?
https://www.sweetwater.com/store/detail ... line-mixer

Yes exactly!
That thing is cool… cool price tag too.

Ya ultimately some used thing would work too. I’ve been searching marketplace for ideas…


Edit…
Getting closer
https://www.parts-express.com/Rolls-MX1 ... vPEALw_wcB

I got an error with that link. I believe it is this one
https://www.parts-express.com/Rolls-MX1 ... w-245-1084

DIY, my dude!
https://www.instructables.com/Making-an-Audio-Mixer/

Has anyone mentioned the Mackie 402VLZ4 yet?
There's an open box available for $60

Tom Smit wrote: ↑Thu Jun 23, 2022 11:13 pm DIY, my dude!
https://www.instructables.com/Making-an-Audio-Mixer/

It’s passive I need to get the signal into the Driverack

Seth wrote: ↑Thu Jun 23, 2022 11:21 pm Has anyone mentioned the Mackie 402VLZ4 yet?
There's an open box available for $60

Oooo I like that one!

Quite a few available from Amazon Warehouse (used)...

https://www.amazon.com/Pyle-Professiona ... 00&sr=8-16

https://www.amazon.com/Mackie-Mix-Mix8- ... 100&sr=8-5

https://www.amazon.com/G-MARK-Channels- ... 00&sr=8-26

https://www.amazon.com/Behringer-802-Pr ... 00&sr=8-27

https://www.amazon.com/Professional-Wir ... 00&sr=8-32

Those would all work for sure.

What do you guys think about this? As long as it’s active.
I could mount this IN my amp rack, then if I needed to all I have to do is plug in my phone or a mic and your ready roll.

https://www.parts-express.com/Rolls-PM3 ... x-245-1114