Fantastic sub, this thing really makes movies fun to watch. I will be building a second to help smooth the response in the room. I'll be posting a follow up thread in the HT section (when I get some more free time) to make sure I'm not going to destroy the driver. I'd like this thing to last a while. Thanks for making these plans available Bill. I tried embedding the photos but gave up, it's already late and I'm ready for bed.
My setup is as follows.
AVR: Pioneer VSX 831
Main Speakers L/R: HT8's
Driver in sub: Dayton DCS 255-4
Amp for sub: SMSL SA98e paired with a MINI DSP 2x4 with the steepest high pass available in the software at around 30hz
https://imgur.com/0h8RXVY
https://imgur.com/RlbmujG
https://imgur.com/orCesSy
https://imgur.com/LsUdDUp
Table Tuba Single 10" 20" Wide Panels
Table Tuba Single 10" 20" Wide Panels
Last edited by rob38888 on Sat Jun 18, 2022 8:32 am, edited 1 time in total.
Re: Table Tuba Single 10" 20" Wide Panels
Very nice! The wife approval factor must be pretty high
Now you just need a curved SLA center channel.
Now you just need a curved SLA center channel.
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
Re: Table Tuba Single 10" 20" Wide Panels
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421