I have a QSC CX502 that i will be pairing in a rack with my Drive Rack. I noticed the QSC has the option for terminal blocks for the inputs.
The manual doesn't give a part number, but does later refer to them as Phoenix type.
I did measure the connector on the amp and I believe it would be a 5mm pitch.
Does anyone happen to have two of these?
QSC amplifier terminal blocks
QSC amplifier terminal blocks
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
Re: QSC amplifier terminal blocks
Is this it?
Luo QiuFa 10Pcs KF2EDG 5.08mm Pitch 3P Pluggable Teminal Blocks Connector Socket https://www.amazon.com/dp/B0932X9B24/re ... GV55EX1EK3
20 for $8.50
https://www.amazon.com/dp/B07796L148/re ... XSQP6V7CRP
Luo QiuFa 10Pcs KF2EDG 5.08mm Pitch 3P Pluggable Teminal Blocks Connector Socket https://www.amazon.com/dp/B0932X9B24/re ... GV55EX1EK3
20 for $8.50
https://www.amazon.com/dp/B07796L148/re ... XSQP6V7CRP
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Re: QSC amplifier terminal blocks
I came across the same thing… I bet it’ll work, hopefully someone here has seen this before
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
Re: QSC amplifier terminal blocks
I bought a bunch of install style amps that have only that style input, no XLR inputs. Those look the same as what's on mine.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 8322
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: QSC amplifier terminal blocks
Why would you want to use the phoenix connector when it will take an xlr? Once you use those, you are killing your ability to swap on the fly in case of a failure. They really are for the install guys who don't use xlrs.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: QSC amplifier terminal blocks
Only because it would be in a rack with the Driverack, always together. I’ll still have a stack of XLR cables should the need arise. Besides it’ll help keep my DIY case a few inches shorter.
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
- Strange Kevin
- Posts: 162
- Joined: Fri May 19, 2017 3:02 pm
- Location: Scottsdale AZ
Re: QSC amplifier terminal blocks
Yup.
The 5mm should be correct.
I just ordered some last week for some crown amps.
The 5mm should be correct.
I just ordered some last week for some crown amps.
Authorized Builder - Phoenix AZ.
Main Rig - 6 DR200s - 6 T48s (30")
SLA Pros for the smaller stuff.
Main Rig - 6 DR200s - 6 T48s (30")
SLA Pros for the smaller stuff.
Re: QSC amplifier terminal blocks
Thanks guys, this will work real nice
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba