Any Interest in a T/S Calculator?

Anything not covered elsewhere.
Post Reply
Message
Author
User avatar
Bryan Cox
Posts: 450
Joined: Sun Nov 22, 2015 3:01 pm
Location: Owensville, Mo

Any Interest in a T/S Calculator?

#1 Post by Bryan Cox »

I've been a member of the forum since late 2015 and there have been countless occasions where we ask if a driver is suitable? I've been toying with an excel sheet that breaks out each cabinet and the required specs. A person would enter the T/S specs of the driver they want to use, and the sheet would spit out an answer on suitability, based on the ranges given in the plans. It's kind of a fun project that I think could be helpful, but it is a ton of work. Do y'all think this is a useful tool or should I save myself some time and drop it?
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Any Interest in a T/S Calculator?

#2 Post by Seth »

I've started a similar spreadsheet too. I wanted to put in specs and have it spit out which cabs are most suitable. Haven't put any automation to it at all. One of those things I started then got sidetracked and forgot about.

PM your email and I'll send you what I have. Might be able to use parts of it and save a little time inputting data.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Post Reply