Jack12 or OmniTop12

The Jack of All Trades pro-sound cabs.
Message
Author
deroy
Posts: 4
Joined: Mon Dec 14, 2020 2:52 pm

Re: Jack12 or OmniTop12

#16 Post by deroy »

Grant Bunter wrote: Wed Dec 16, 2020 2:37 pm
deroy wrote: Wed Dec 16, 2020 2:17 am the eminence is only available in US/GB.
Hi!
Eminence is stocked at Thoman.de, so should be widely available through Europe...
yes, eminence low drivers are no problem. only the 1" isn't available here.

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Jack12 or OmniTop12

#17 Post by Grant Bunter »

deroy wrote: Wed Dec 16, 2020 3:25 pm
Grant Bunter wrote: Wed Dec 16, 2020 2:37 pm
deroy wrote: Wed Dec 16, 2020 2:17 am the eminence is only available in US/GB.
Hi!
Eminence is stocked at Thoman.de, so should be widely available through Europe...
yes, eminence low drivers are no problem. only the 1" isn't available here.
Understood.
They do get eminence in though, so have access to whatever you want.
Send them an e-mail. it might be possible...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Grant Bunter
Posts: 6915
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Jack12 or OmniTop12

#18 Post by Grant Bunter »

Also, with other brands, check the dimensions of the compression drivers carefully.
There's not unlimited room to fit deeper or wider than the recommended driver...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Post Reply