What's to chat about?
Re: What's to chat about?
I agree with you, Grant. It is interesting. Although, if I didn't have wireless gear, I'm not sure it would be interesting enough. You're probably right too, about identifying vacant bands not being a real big issue now-a-days.
It's likely more of a toy/tool for me to fiddle with than it is a necessary piece of gigging equipment. Although I do intend to glean a little knowledge about bandwidth management in the endeavor and learn to set up my wireless devices with an intentional plan instead of the willy-nilly, pick channels purely based on the numbers "speaking to me" method I've been relying on up to this point. I have five IEM transmitters and only 2 wireless mics, so it's not like I have a ton of wireless stuff. I suppose it could also be helpful in identifying the least congested WiFi band to set the Gig Router on. But, I have an app in my phone that's probably more convenient for that purpose.
Once I learn more about bandwidth management and set up all my stuff, it may just end up in the gig bag along side the Multi-Meter and Oscilloscope as a troubleshooting tool should the need ever arise.
I'll keep you guys posted and share whatever I learn along the way. In the absolute worst case, it'll give you guys some reading material. I should get to fiddling within the next few days. Stay tuned! (shameless pun)
It's likely more of a toy/tool for me to fiddle with than it is a necessary piece of gigging equipment. Although I do intend to glean a little knowledge about bandwidth management in the endeavor and learn to set up my wireless devices with an intentional plan instead of the willy-nilly, pick channels purely based on the numbers "speaking to me" method I've been relying on up to this point. I have five IEM transmitters and only 2 wireless mics, so it's not like I have a ton of wireless stuff. I suppose it could also be helpful in identifying the least congested WiFi band to set the Gig Router on. But, I have an app in my phone that's probably more convenient for that purpose.
Once I learn more about bandwidth management and set up all my stuff, it may just end up in the gig bag along side the Multi-Meter and Oscilloscope as a troubleshooting tool should the need ever arise.
I'll keep you guys posted and share whatever I learn along the way. In the absolute worst case, it'll give you guys some reading material. I should get to fiddling within the next few days. Stay tuned! (shameless pun)
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 454
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: What's to chat about?
Unrelated and random question: I'm curious about which cab design was the first..
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: What's to chat about?
I designed my first cab in 1970. It's not among the present collection. Of those I think the T24 is the oldest.
-
- Posts: 454
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: What's to chat about?
Roger, was the first cab a midrange or a sub?
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: What's to chat about?
Electric bass. In 1970 there was no such thing as tops and subs.
-
- Posts: 454
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: What's to chat about?
Ok thank you, it's cool to know where you started with your designs Bill.
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
Re: What's to chat about?
Hey, have any of you guys used the Amazon Alexa Echo Studio smart speaker? I bought one as a gift for my Mom about a year ago. Every time I visit, I'm always so impressed with the musicality, given what it is. I haven't run any spectrum analysis and I suspect there's a fair amount of psychoacoustic bass DSP, but it "sounds" like it digs a little deeper than any of the other larger streaming based speakers I've heard, like Sonos. Have any of you had a similar (or opposing) experience?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Re: What's to chat about?
Seth, I have not. I am responding before I add a post on a different topic.
TomS
Re: What's to chat about?
On Friday, July 14/23 I drove over to Albany NY to see Camrynekai's PA at the Farmerman Fest. I had a fine time tasting different whiskeys and beer, listening to the bands, and chit chatting with Camrynekai. Whilst I was so close, I contacted Tactix to see if he wanted to come to the festival, and meet up. It ended up being that he and his family met up with me at the Golden Eagle restaurant at the famous hairpin curve in Massechusets. Lunch was good, the view was spectacular, and the visit was much enjoyable.
TomS
-
- Posts: 454
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: What's to chat about?
Seth I bought a JBL Boombox 2 a couple of years ago mostly for camping, it's wicked! Properly loud, long battery life, waterproof and if you have 2 you can link them as left/right for stereo!
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
Re: What's to chat about?
That's great! I wouldn't say the Echo Studio is proper loud. It's loud enough for most in-room listening, but I wouldn't expect to host a dance party with it. I'll keep the JBL option in the back of my mind if the need ever arises. Thanks for the mention Keryn.Keryn O'Shea wrote: ↑Mon Jul 24, 2023 3:12 amSeth I bought a JBL Boombox 2 a couple of years ago mostly for camping, it's wicked! Properly loud, long battery life, waterproof and if you have 2 you can link them as left/right for stereo!
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 454
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: What's to chat about?
Searching the forum l couldn't find the answer, l gave myself a headache trying to work it out, probably going to slap myself when I'm told... what does DR stand for?
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
Re: What's to chat about?
Double RadiusKeryn O'Shea wrote: ↑Tue Aug 01, 2023 7:10 am Searching the forum l couldn't find the answer, l gave myself a headache trying to work it out, probably going to slap myself when I'm told... what does DR stand for?
TomS
-
- Posts: 454
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: What's to chat about?
Thank you very much mate!
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
Re: What's to chat about?
I asked a long time ago and I have it in my mind the answer was Dual Reverse
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421