BillFitzmaurice.info

Hello,

A day ago I started to build 4 titan's 48.
I'm going to load them with Eminence 3015LF and I'm going to make it maximum width.

I'm just started with one side, Today I'm going to get some birch and then I will go on.
I'm going to build them all together.

The amp that I will be using for the subs is a Synq 2k2
This means I will put 2 titan's per channel at 1100W per channel.
I think this must be enough?

Here is a picture of what I've done so far, but I will upload a lot more this week.



I'll keep you updated

It's been a busy weekend, I'm allmost done with the first cab.
I followed the plans securely and I didn't find any problems during the build.
I found them much easyer to build than Jack.
Tonight I will fit the last braces and the hole for the speakon connections so I can paint them this week.

Here are some pictures!

First I started with the side, I screwed and glued the first panels on.


The baffle:



The chamber is now done:



I forgot to take picture's during the build so I've missed a couple steps:















Allmost ready for the second side, first some bracing is need to be done:






Build this in my workshop:


That's it for now!

Nice build and nice workshop. Very tidy

Those are going to be beastly.

Very nice, looks good, same goes to your workshop

Thanks all!
I like my workshop clean so I can work comfortable.

I'm building the titan's one by one so I can build them with precision.
I don't want to look over any steps so I take all the time I need.
But what are the titans big! They really are big!
I can't wait till I finished them and when I can hear them!

Nice job but the workshop is far too tidy, It's just not healthy like that

Great work and excellent tidy clean workshop!

Haven't seen Harley around for a while, but I would like to nominate you for one of his awards

Grant Bunter wrote:Great work and excellent tidy clean workshop!

Haven't seen Harley around for a while, but I would like to nominate you for one of his awards

He's probably re-arranging his tools into alphabetical order

escapemcp wrote:

Grant Bunter wrote:Great work and excellent tidy clean workshop!

Haven't seen Harley around for a while, but I would like to nominate you for one of his awards

It's easy to keep everything clean, and my work goes a lot quicker in a clean workshop

Does anyone know how many braces I have to install at the horn mouth?
I know in my sketchup are used 3 but I've seen some 36'' width with 2 braces?

Nice Build mate.

Re: Braces, use three for sure it would be in the plans definitely. They would be around 9 inches centre to centre, don't want to waste any glorious output on flexing the cabs timber

Titanium Hand wrote:Nice Build mate.

Re: Braces, use three for sure it would be in the plans definitely. They would be around 9 inches centre to centre, don't want to waste any glorious output on flexing the cabs timber

Thanks!
I will use three braces. I will saw them after work and install them.
I've filled al the screw holes and I think it will be ready for primer tomorrow.

Them are huge!!
What are they going to be used for?

I'm using them for live music and for some dj music.
Titan nr.1 is done and the second one is also nearly finished.

Here are some pictures:





They're beasts!

They are beasts!