BillFitzmaurice.info

Hello all,

I have a GTD Audio G 788H with 2 Mics. I have broken 2 of the 4 antennas due to the location in my amp/mixer case. I would like to extend the antennas by running a wire from the unit to a location outside of the case. About 2 feet.

Does anyone know what the type of connection is used for the antennas?

It looks like a coax connection, but much smaller. I have searched on the net and have not been able to correctly identify them.

Thanks in advance,

Oscar

Theyre TNC connectors. not BNC, TNC.

Thank you Brent. TNC Got it

Ok for those that may be interested. Here is a link to the cable that I found on Amazon.com to mount the antennas remotely.

**** EDIT: These did not work Bulkhead was different type (N-Type)
WLAN Coax Cable KSR195, N-Type female bulkhead O-ring to TNC male pigtail 50cm Ships from USA
http://www.amazon.com/gp/product/B00MLN ... 9VQQX5B1VJ

Hope this can help others