Video of my T39's and OT 12's
Posted: Wed Aug 27, 2014 5:02 pm
I made a video to demo an EQ I'm selling and it sounded rather good so I figured I would share it here.
This is the link: http://youtu.be/HO4rFmrDn_o
There are video's on youtube of BFM's stuff, but a lot are out doors showing the clarity and volume over a distance, or short and distorted inside. The way I recorded this, it sound almost like I took it off the board as oppose to the mics. Thus I think it gives a good indication of just what these speakers are capable of. Plus, in doing the demo I'm moving the sliders so you get to hear how the speakers respond. I move them in batches, so it's like boosting or cutting the low, mid and high one at a time.
I used my Zoom H2 recorder which does very well for what it is and feed that into the Zoom Q3HD video recorder. The Q3 does ok, but you only have 3 fixed settings for gain. High, low and Auto. Auto sucks. Low works when the band is playing and high can get overloaded easily. Plus the H2 has better mics. I'm going to be recording our gigs this way from now on. Next on the list is a better camera to run the H2 into.
This is performed in our practice room. It is a fairly dead room as rooms go. At the end of the video I scan the room to show the speakers. You can see by the position they are set for us to hear when we practice. The H2 was set back and kind of between the 2 OT 12's. One side is a bit stronger as it is pointed more directly at the mic of the recorder. I am playing Bodhisattva by Steely Dan off the computer, into our board out to the speakers via a Crown 802 for the subs and a Peavey 1500 IPR for the tops. The EQ is connected via the main inserts. It's a DBX drive rack.
The left/right balance will be a bit off because of the mic placement and playing with the gains on the EQ.
Let me know what you think. I was uncertain of where to post this. If you think this sounds rather good, them I'm thinking of repeating this (without the EQ) using the BFM's and then the QSC's we have. I can do one set up, and just change the speakers, make sure the overall db's are the same and use the same song. I think I can get a good BFM vs QSC video up in a way that keeps the test parameters the same using this recording method.
This is the link: http://youtu.be/HO4rFmrDn_o
There are video's on youtube of BFM's stuff, but a lot are out doors showing the clarity and volume over a distance, or short and distorted inside. The way I recorded this, it sound almost like I took it off the board as oppose to the mics. Thus I think it gives a good indication of just what these speakers are capable of. Plus, in doing the demo I'm moving the sliders so you get to hear how the speakers respond. I move them in batches, so it's like boosting or cutting the low, mid and high one at a time.
I used my Zoom H2 recorder which does very well for what it is and feed that into the Zoom Q3HD video recorder. The Q3 does ok, but you only have 3 fixed settings for gain. High, low and Auto. Auto sucks. Low works when the band is playing and high can get overloaded easily. Plus the H2 has better mics. I'm going to be recording our gigs this way from now on. Next on the list is a better camera to run the H2 into.
This is performed in our practice room. It is a fairly dead room as rooms go. At the end of the video I scan the room to show the speakers. You can see by the position they are set for us to hear when we practice. The H2 was set back and kind of between the 2 OT 12's. One side is a bit stronger as it is pointed more directly at the mic of the recorder. I am playing Bodhisattva by Steely Dan off the computer, into our board out to the speakers via a Crown 802 for the subs and a Peavey 1500 IPR for the tops. The EQ is connected via the main inserts. It's a DBX drive rack.
The left/right balance will be a bit off because of the mic placement and playing with the gains on the EQ.
Let me know what you think. I was uncertain of where to post this. If you think this sounds rather good, them I'm thinking of repeating this (without the EQ) using the BFM's and then the QSC's we have. I can do one set up, and just change the speakers, make sure the overall db's are the same and use the same song. I think I can get a good BFM vs QSC video up in a way that keeps the test parameters the same using this recording method.