Page 1 of 1

MMHS Dance

Posted: Sun Apr 22, 2012 4:08 pm
by Lastcat

Re: MMHS Dance

Posted: Sun Apr 22, 2012 4:20 pm
by bassmonster
Nice rig and clean setup! Haven't seen you around here in awhile.

Re: MMHS Dance

Posted: Sun Apr 22, 2012 5:52 pm
by Lastcat
Hi Bassmonster,

Thanks :)

I think ever since I have finished my builds, I have been busy pulling together everything for the Business. But, drop in often to view the new post. Lots going on.

LC

Re: MMHS Dance

Posted: Fri May 18, 2012 12:47 pm
by Whiterob
Watched your other vid with the laser.. Thing is awesome, but be careful using it in public because I know a local laser guy just had to spend a couple grand showing that his lasers were legal. I love lasers, but the feds are cracking down on them pretty hard lately.

Re: MMHS Dance

Posted: Fri May 18, 2012 2:03 pm
by technicaldave
Just keep them pointed at the ceiling out of eye line, should be ok

Re: MMHS Dance

Posted: Fri May 18, 2012 3:33 pm
by Whiterob
technicaldave wrote:Just keep them pointed at the ceiling out of eye line, should be ok
I was assuming he knew that, but you have to have a license for anything over 5mW in a public location IIRC. And that is regardless of how you place them.

Re: MMHS Dance

Posted: Fri May 18, 2012 4:38 pm
by DJPhatman
Whiterob wrote:
technicaldave wrote:Just keep them pointed at the ceiling out of eye line, should be ok
I was assuming he knew that, but you have to have a license for anything over 5mW in a public location IIRC. And that is regardless of how you place them.
But, we are in the USA, and technicaldave is in the UK. Different laws, rules and rights. :roll:

Re: MMHS Dance

Posted: Fri May 18, 2012 8:58 pm
by technicaldave
Yeh seems the regs are different. We have ridiculous amounts of health and safety legislation though, so even though you don't need a licence , you're still supposed to limit output in smokeless areas, put signs up around the place, reduce the intensity if there's people influenced from alcohol, use a fat beam or cluster if you can , have it 3m over heads etc.