Loctite PL Premium in Australia

Helpful hints on how to build 'em, and where to get the stuff you need.
Message
Author
User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Loctite PL Premium in Australia

#61 Post by Seth »

Congratulations! You're the new sole source and distributor of PL for the entire country! You've got the market cornered and can nearly name any price. LOL
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Keryn O'Shea
Posts: 444
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Loctite PL Premium in Australia

#62 Post by Keryn O'Shea »

Ok, so this is Unobond. The first impression was it continues to ooze out all over everything like PL, though the tube has a great cap, properly threaded. I'll be keeping it in the fridge too, a Loctite rep told me this tip recently
Attachments
20221030_140917.jpg
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L

Keryn O'Shea
Posts: 444
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Loctite PL Premium in Australia

#63 Post by Keryn O'Shea »

Initial fillet
Attachments
20221030_113959.jpg
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L

Keryn O'Shea
Posts: 444
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Loctite PL Premium in Australia

#64 Post by Keryn O'Shea »

Screws up from underside, initial squeeze out.
Attachments
20221030_114137.jpg
20221030_114146.jpg
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L

Keryn O'Shea
Posts: 444
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Loctite PL Premium in Australia

#65 Post by Keryn O'Shea »

1mm gap sanded off at the end to see how far it expands.
Attachments
20221030_120341.jpg
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L

Keryn O'Shea
Posts: 444
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Loctite PL Premium in Australia

#66 Post by Keryn O'Shea »

After 2 hours, I'll chisel off one side and leave this for 24 hours.
Attachments
20221030_135834.jpg
20221030_135823.jpg
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L

Keryn O'Shea
Posts: 444
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Loctite PL Premium in Australia

#67 Post by Keryn O'Shea »

No further noticeable expansion after 24hrs. Very strong bond though, hurt myself trying to break the join in a vise!
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L

Post Reply