Table Tuba 18" wide build (Finished, Pictures on page3+4)

Post your build odyssey here.
Message
Author
zvipster
Posts: 75
Joined: Mon Mar 11, 2013 4:14 am

Re: Table Tuba 18" wide build (Finished, Pictures on page3+4

#61 Post by zvipster »

I've now turned the Tuba 180 degrees, so the mouth is away form the corner.
Stupid move you might say.
Not in my room.

This way the bass seems so much more omni directional!
And it takes the top off of the very low end, which actually is rather loud!! :D
More testing to come :D
I've got the brain to think but not the hands to build.

User avatar
shawn_g
Posts: 386
Joined: Sat Jan 14, 2012 9:00 pm
Location: Logan, OH

Re: Table Tuba 18" wide build

#62 Post by shawn_g »

zvipster wrote:How much voltage can this driver take?? (JBL GTO804)
I've had it up to 20v, that gave me a headache, so I turned it down and during listening it peaks at about 2.5v
If you want to play it safe, don't go beyond 25 volts or so, which is about 80% of the RMS rating of the driver (~28 volts is the RMS rating).

zvipster
Posts: 75
Joined: Mon Mar 11, 2013 4:14 am

Re: Table Tuba 18" wide build

#63 Post by zvipster »

shawn_g wrote:
zvipster wrote:How much voltage can this driver take?? (JBL GTO804)
I've had it up to 20v, that gave me a headache, so I turned it down and during listening it peaks at about 2.5v
If you want to play it safe, don't go beyond 25 volts or so, which is about 80% of the RMS rating of the driver (~28 volts is the RMS rating).
Who can take 25V of this thing???? :?: :?: :noob:
Perhaps if I where to use it in a public place..
I've got the brain to think but not the hands to build.

Post Reply