Re: Zumba J15 build with CD
Posted: Fri Jun 30, 2017 12:14 am
Before I swapped the cap I re soldered and it still would clip, so I swapped caps and wouldn't you know. It still clipped.Tom Smit wrote:The solder joints for the cap look like they could be redone. I would try that first, just to be sure.
So I decided to RTFP & RRTFP. That is when I saw my mistake. I had the In and out reversed on the pos lead. I swapped ends an no more clipping. So I installed the original cap and all is good
Thank you for all your help
P.S. note to self. When in doubt RRTFP
