Re: Omni12 Bass Cab Build - dual 10 BP102, LA6-CBMR, APT80
Posted: Tue Sep 04, 2012 2:55 pm
In case you're interested in the chart:
Lesson #472 of building a BF (or any) cab: driver gaskets will compress.
Everything was fine yesterday and when I tested today, the low B/C on my 5 string created a buzzing/rattling in the cab. "Can't be!", says I. Then I recalled someone talking about driver gasket compression. I opened 'er up, cranked down on the Bp102 recex screws and, lo and behold, 3 or 4 had some play in them. Buttoned everything back up and all is good.