Omni12 Bass Cab Build - dual 10 BP102, LA6-CBMR, APT80
Re: Omni12 Bass Cab Build - dual 10 BP102, LA6-CBMR, APT80
In case you're interested in the chart:
T39 - Dual BP102 23"
AutoTuba
J12 x 2 - Deltalite 2512
O12 - Dual BP102
AutoTuba
J12 x 2 - Deltalite 2512
O12 - Dual BP102
Re: Omni12 Bass Cab Build - dual 10 BP102, LA6-CBMR, APT80
Lesson #472 of building a BF (or any) cab: driver gaskets will compress.
Everything was fine yesterday and when I tested today, the low B/C on my 5 string created a buzzing/rattling in the cab. "Can't be!", says I. Then I recalled someone talking about driver gasket compression. I opened 'er up, cranked down on the Bp102 recex screws and, lo and behold, 3 or 4 had some play in them. Buttoned everything back up and all is good.
Everything was fine yesterday and when I tested today, the low B/C on my 5 string created a buzzing/rattling in the cab. "Can't be!", says I. Then I recalled someone talking about driver gasket compression. I opened 'er up, cranked down on the Bp102 recex screws and, lo and behold, 3 or 4 had some play in them. Buttoned everything back up and all is good.
T39 - Dual BP102 23"
AutoTuba
J12 x 2 - Deltalite 2512
O12 - Dual BP102
AutoTuba
J12 x 2 - Deltalite 2512
O12 - Dual BP102