Getting PL off hands?

Helpful hints on how to build 'em, and where to get the stuff you need.
Message
Author
BoostFab
Posts: 458
Joined: Fri Sep 17, 2010 2:51 pm
Location: DFW, TX

Re: Getting PL off hands?

#31 Post by BoostFab »

Use automotive hand wash that has sand on it, it all come off easily. I never wear gloves, and that's what I used. Just wash your hand before the PL dried up.

Image

User avatar
Tom Smit
Posts: 7566
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Getting PL off hands?

#32 Post by Tom Smit »

+1 for Gojo-like products.
TomS

User avatar
chenry78
Posts: 145
Joined: Tue Dec 06, 2011 6:52 am
Location: Des Moines, Iowa
Contact:

Re: Getting PL off hands?

#33 Post by chenry78 »

yup, wait at least a week :lol:

i did, and continue to do the same thing, i get all into the project and my gloves are out in the garage and im like, "oh ill just get a lil on just one finger". Yeah right, face it, your gonna run around with lepar hands for a while! :horse:

Grant Bunter
Posts: 6912
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Getting PL off hands?

#34 Post by Grant Bunter »

Can I just give everyone a heads up about latex gloves...

About 10 years ago all hospitals in Australia basically banned latex, due to increasing allergy problems which include life threatening anaphylaxis.
It is repeated exposure to latex that is showing increased sensitivity to it.

Having said that, if you wear latex and get anaphylaxis and die, the last thing you'll need to worry about is if you've run out of fingers or PL on your hands :oops:
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Titanium Hand
Posts: 559
Joined: Mon Sep 05, 2011 4:32 am
Location: Sydney, Australia

Re: Getting PL off hands?

#35 Post by Titanium Hand »

Imagine the shock of Anaphylaxis from using a Latex Condom :shock:

Safe Sex.... Really?
Built 2 x T39 Lab 12 loaded 457mm wide, 29inch Wide Dual Lab 12 Loaded T60 and 2 x OTop 112 2512 Melded. Powered by N.I.TRAKTOR Pro 2.6 (2.6.1 has too many issues) TRAKTOR KONTROL S2 Crown XTi2000

Grant Bunter
Posts: 6912
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Getting PL off hands?

#36 Post by Grant Bunter »

Titanium Hand wrote:Imagine the shock of Anaphylaxis from using a Latex Condom :shock:

Safe Sex.... Really?
:loler:

Good one, as tempted as I am to say something more.... I will behave
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

UROK

Re: Getting PL off hands?

#37 Post by UROK »

:loler:

Aussies inna da howwwwssse!

Good onya mates! :clap:

Like a bit of down under humor! :wink: :wink: , say no more, a nod's as good as a wink to a blind man! Eh? Eh?

Off topic but: Harley had a world cup rugby thread going. We should get a cricket one going next Ashes. Try educate the forum on the intracicies and beauty of test match cricket!

CoronaOperator
Posts: 1648
Joined: Wed Mar 25, 2009 7:07 pm
Location: Medicine Hat, Alberta, Canada

Re: Getting PL off hands?

#38 Post by CoronaOperator »

Titanium Hand wrote:Imagine the shock of Anaphylaxis from using a Latex Condom :shock:

Safe Sex.... Really?

Not really a problem anymore ... Due to 12/21/12, condoms are no longer neccesary after april anyways :hyper: !!!
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience

Titanium Hand
Posts: 559
Joined: Mon Sep 05, 2011 4:32 am
Location: Sydney, Australia

Re: Getting PL off hands?

#39 Post by Titanium Hand »

CoronaOperator wrote:Not really a problem anymore ... Due to 12/21/12, condoms are no longer neccesary after april anyways
In the words of Pauline Hanson... "Please Explain"?

Test match cricket, intracies indeed. I'm more of a 20 ' 20 and one day'r man myself. Can't beat a cold beer in hand on a balmy summer eve watching Australia carve up the world in Cricket. Well ok, India's hit some pretty good form of late although historically Australia plays consistently well.
Built 2 x T39 Lab 12 loaded 457mm wide, 29inch Wide Dual Lab 12 Loaded T60 and 2 x OTop 112 2512 Melded. Powered by N.I.TRAKTOR Pro 2.6 (2.6.1 has too many issues) TRAKTOR KONTROL S2 Crown XTi2000

CoronaOperator
Posts: 1648
Joined: Wed Mar 25, 2009 7:07 pm
Location: Medicine Hat, Alberta, Canada

Re: Getting PL off hands?

#40 Post by CoronaOperator »

Titanium Hand wrote:
CoronaOperator wrote:Not really a problem anymore ... Due to 12/21/12, condoms are no longer neccesary after april anyways
In the words of Pauline Hanson... "Please Explain"?

The date 12/21/2012 is the end of the ancient mayan calender and some radicals believe may be the end of the world. April would be 9 months before that date :wink:
Built:
17" width 10" driver Autotuba
2 x 29" width dual Lab12 Tuba60
6 x DR250 2510/asd1001
In progress:
2 x DR250 2510/asd1001
For best results, point the loud end of the array towards the audience

Bruce Weldy
Posts: 8538
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Getting PL off hands?

#41 Post by Bruce Weldy »

CoronaOperator wrote:
Titanium Hand wrote:
CoronaOperator wrote:Not really a problem anymore ... Due to 12/21/12, condoms are no longer neccesary after april anyways
In the words of Pauline Hanson... "Please Explain"?

The date 12/21/2012 is the end of the ancient mayan calender and some radicals believe may be the end of the world. April would be 9 months before that date :wink:
And since the Mayan calendar didn't take into account leap day every four years, their last day was actually several months ago........once again, the end of the world passed and no one noticed.....

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Grant Bunter
Posts: 6912
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Getting PL off hands?

#42 Post by Grant Bunter »

CoronaOperator wrote: The date 12/21/2012 is the end of the ancient mayan calender and some radicals believe may be the end of the world. April would be 9 months before that date :wink:
Well that's handy, no problem for us Aussies anyway, we have the day of the month first....
So we would have 21/12/2012.
Does this mean we get to take over the world???????
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
DJ Higgumz
Posts: 804
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

Re: Getting PL off hands?

#43 Post by DJ Higgumz »

well sorry to end the rambling, but i personally don't like using gloves, because you don't "feel" what your doing. also as said before you would likely spread pl around on your gloves and not even know it. abrasive soap is the way to go, and if that doesnt get it off, just strut around showing them off, why hide it? To me glued up hands (and shoes) are a trophy.

also for paint carburator cleaner and paper towels work great. probably not healthy though....
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

88h88
Posts: 1603
Joined: Mon Jul 04, 2011 10:20 am
Location: Coventry, UK

Re: Getting PL off hands?

#44 Post by 88h88 »

Use a pumice stone, you know what those are right? Your lady probably has one for removing rough skin off her feet.
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"

Grant Bunter
Posts: 6912
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Getting PL off hands?

#45 Post by Grant Bunter »

DJ Higgumz wrote:well sorry to end the rambling, but i personally don't like using gloves, because you don't "feel" what your doing. also as said before you would likely spread pl around on your gloves and not even know it. abrasive soap is the way to go, and if that doesnt get it off, just strut around showing them off, why hide it? To me glued up hands (and shoes) are a trophy.

also for paint carburator cleaner and paper towels work great. probably not healthy though....
It is a common misconception that wearing gloves makes you lose "feel".
I worked in the Operating rooms for 17 years. During that time it became mandatory to wear not one but 2 pairs of gloves for a variety of reasons.
When you get used to it, you have just as much feel with gloves on as not.
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Post Reply