Page 20 of 21
Re: Introducing SPL Chart
Posted: Fri Jan 16, 2015 10:59 pm
by escapemcp
chrisj360 wrote:If I was to try to approximate the output of multiple T30's (I have the Lab12 loaded and I think the 3012LF is the closest match), I would just add +3 for each cab added like so?
Is this correct or did I miss something?
It's
+6dB for every
doubling of cab count (assuming they are properly powered like the first). 1 cab=as chart, 2=+6dB, 4=+12dB, 8=+18dB, 16=24dB (etc)
Re: Introducing SPL Chart
Posted: Sat Jan 17, 2015 10:19 pm
by Rich4349
Could we get the T-45 with 3012l, in 15 and 24" versions, please? (Plus 18 or 20 would be a pleasant bonus, too
)
Re: Introducing SPL Chart
Posted: Mon Mar 16, 2015 5:13 am
by CoronaOperator
[spl width =650&height=450&fmin=20&fmax=120&dbmin=85&dbmax=125]T60W15DLab12+12,T45W24DLab12+12,T60W30DLab12X2+6,JBLSRX728+8.1[/spl]
Re: Introducing SPL Chart
Posted: Mon Mar 16, 2015 10:14 pm
by Drey Chennells
nice chart thank you
Re: Introducing SPL Chart
Posted: Mon Mar 16, 2015 10:22 pm
by CoronaOperator
Drey Chennells wrote:nice chart thank you
I'm trying to see if 4 Tubas @ 50 volts are a suitable replacement/improvement over 2 SRX728's @ ~70-80 volts hence the +12 dB's and +8 dB's added to the charts. Looks like a build thread coming soon.
Re: Introducing SPL Chart
Posted: Mon Mar 16, 2015 11:40 pm
by Drey Chennells
hell yea good choice
Re: Introducing SPL Chart
Posted: Wed Mar 18, 2015 9:15 am
by Rich4349
Bill Fitzmaurice wrote:Do you propose that I build and measure a cab in every conceivable size loaded with every conceivable driver? That most assuredly is not going to happen.
No, I thought you had modelling software that eliminated the need to build every idea that comes out of your drafting table.
Re: Introducing SPL Chart
Posted: Mon Mar 23, 2015 3:28 am
by 88h88
Rich4349 wrote:No, I thought you had modelling software that eliminated the need to build every idea that comes out of your drafting table.
Where's the fun in that?!
Re: Introducing SPL Chart
Posted: Fri Jul 03, 2015 5:21 pm
by Luke the Fluke
sorry justl ooking at something
Re: Introducing SPL Chart
Posted: Thu Aug 20, 2015 12:50 pm
by DJPhatman
Chris_Allen, will the Simplexx line-up be added anytime soon?
Re: Introducing SPL Chart
Posted: Thu Aug 20, 2015 1:12 pm
by Chris_Allen
I lost the up to date source code for the application I wrote to do the sampling. So I'm trying to find the time to update an old copy.
Re: Introducing SPL Chart
Posted: Sun Jan 22, 2017 8:45 pm
by DJPhatman
DJPhatman wrote:Chris_Allen, will the Simplexx line-up be added anytime soon?
Chris_Allen wrote:I lost the up to date source code for the application I wrote to do the sampling. So I'm trying to find the time to update an old copy.
Still waiting....
Re: Introducing SPL Chart
Posted: Wed May 10, 2017 12:41 pm
by DJPhatman
DJPhatman wrote:Chris_Allen, will the Simplexx line-up be added anytime soon?
1 1/2 years later, and still waiting...
Re: Introducing SPL Chart
Posted: Sat May 13, 2017 2:12 am
by Chris_Allen
DJPhatman wrote:DJPhatman wrote:Chris_Allen, will the Simplexx line-up be added anytime soon?
1 1/2 years later, and still waiting...
Point taken.
Re: Introducing SPL Chart
Posted: Sat May 13, 2017 12:47 pm
by DJPhatman
Chris_Allen wrote:DJPhatman wrote:DJPhatman wrote:Chris_Allen, will the Simplexx line-up be added anytime soon?
1 1/2 years later, and still waiting...
Point taken.
Sorry, mate! But, sometimes the stick just makes you.
CHECK, PLEASE!!!!
An ode to someone elses "Get my coat!"