Page 11 of 11
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Thu Jun 06, 2024 3:50 pm
by Seth
Rich4349 wrote: ↑Thu Jun 06, 2024 11:04 am
After all of his contributions and calculations, I hope Seth gets a statue at Burningman! OR at least a great big plaque mounted in plain sight!
Thanks Rich. No statues or plaques necessary. I'd be happy with a detailed system review writeup with pics and a decent video of five or more minutes. Although, I've started a ball rolling to possibly attend Burning Man this year. So perhaps, if things go well for me, I'll have the pleasure of experiencing this system in person. I've got a modest library of songs with content in the 25Hz to 40Hz range and I'd really like to see how well a system of this magnitude can reproduce those frequencies outdoors. Fingers are crossed
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Thu Jun 06, 2024 9:26 pm
by Tom Smit
Seth wrote: ↑Thu Jun 06, 2024 3:50 pm
Rich4349 wrote: ↑Thu Jun 06, 2024 11:04 am
After all of his contributions and calculations, I hope Seth gets a statue at Burningman! OR at least a great big plaque mounted in plain sight!
Thanks Rich. No statues or plaques necessary. I'd be happy with a detailed system review writeup with pics and a decent video of five or more minutes. Although, I've started a ball rolling to possibly attend Burning Man this year. So perhaps, if things go well for me, I'll have the pleasure of experiencing this system in person. I've got a modest library of songs with content in the 25Hz to 40Hz range and I'd really like to see how well a system of this magnitude can reproduce those frequencies outdoors. Fingers are crossed
I hope that you can make it there, Seth!
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Fri Jun 07, 2024 12:34 am
by Keryn O'Shea
Seth wrote: ↑Thu Jun 06, 2024 3:50 pm
..Although, I've started a ball rolling to possibly attend Burning Man this year...
Let us know if you need any help pushing the ball..
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Fri Jun 07, 2024 7:32 am
by Bruce Weldy
Rich4349 wrote: ↑Thu Jun 06, 2024 11:04 am
After all of his contributions and calculations, I hope Seth gets a statue at Burningman! OR at least a great big plaque mounted in plain sight!
It should be a statue of him starely pensively into space while clutching a slide rule.
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Sun Jul 07, 2024 2:13 pm
by Seth
Progress check. You've got about 40 days to complete construction. How's it coming along?
Also, it's looking like I won't be able to make it to Burning Man this year. Knee surgery scheduled in August will likely make it an unreasonable activity to participate in. Bummer. But, health fist, then fun.
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Mon Sep 23, 2024 12:28 pm
by ketoet
I'm curious how this mighty project turned out?
Did the system make it to burningman?
If so how did it perform?
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Thu Jul 24, 2025 3:42 pm
by Seth
Bill,
The guys working on this T60 project contacted me with a question I can't answer. The chamber divider panel, panel 5, got cut an eighth too short, 6 7/8". Which, when dry fitted in place causes it to be about 5/8" too far to the left, which in turn causes the driver chamber to be a little bigger. They're building 32 cabs. Should they recut 32 more panel 5's or is that slight difference in chamber volume nothing to be concerned about?
20" wide, LAB12
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Thu Jul 24, 2025 9:16 pm
by Bill Fitzmaurice
I doubt it would have much effect.
Re: Are 24 x T60-LAB15s Enough? ;)
Posted: Thu Jul 24, 2025 10:06 pm
by Seth
Thank you. I didn't think so. But, for such an epic project, best to check.