Are 24 x T60-LAB15s Enough? ;)

[Seth]

After all of his contributions and calculations, I hope Seth gets a statue at Burningman! OR at least a great big plaque mounted in plain sight!

Thanks Rich. No statues or plaques necessary. I'd be happy with a detailed system review writeup with pics and a decent video of five or more minutes. Although, I've started a ball rolling to possibly attend Burning Man this year. So perhaps, if things go well for me, I'll have the pleasure of experiencing this system in person. I've got a modest library of songs with content in the 25Hz to 40Hz range and I'd really like to see how well a system of this magnitude can reproduce those frequencies outdoors. Fingers are crossed

[Tom Smit]

After all of his contributions and calculations, I hope Seth gets a statue at Burningman! OR at least a great big plaque mounted in plain sight!

Thanks Rich. No statues or plaques necessary. I'd be happy with a detailed system review writeup with pics and a decent video of five or more minutes. Although, I've started a ball rolling to possibly attend Burning Man this year. So perhaps, if things go well for me, I'll have the pleasure of experiencing this system in person. I've got a modest library of songs with content in the 25Hz to 40Hz range and I'd really like to see how well a system of this magnitude can reproduce those frequencies outdoors. Fingers are crossed

I hope that you can make it there, Seth!

[Keryn O'Shea]

..Although, I've started a ball rolling to possibly attend Burning Man this year...

Let us know if you need any help pushing the ball..

[Bruce Weldy]

After all of his contributions and calculations, I hope Seth gets a statue at Burningman! OR at least a great big plaque mounted in plain sight!

It should be a statue of him starely pensively into space while clutching a slide rule.

[Seth]

Progress check. You've got about 40 days to complete construction. How's it coming along?

Also, it's looking like I won't be able to make it to Burning Man this year. Knee surgery scheduled in August will likely make it an unreasonable activity to participate in. Bummer. But, health fist, then fun.

[ketoet]

I'm curious how this mighty project turned out?
Did the system make it to burningman?
If so how did it perform?

[Seth]

Bill,
The guys working on this T60 project contacted me with a question I can't answer. The chamber divider panel, panel 5, got cut an eighth too short, 6 7/8". Which, when dry fitted in place causes it to be about 5/8" too far to the left, which in turn causes the driver chamber to be a little bigger. They're building 32 cabs. Should they recut 32 more panel 5's or is that slight difference in chamber volume nothing to be concerned about?

20" wide, LAB12

[Bill Fitzmaurice]

I doubt it would have much effect.

[Seth]

Thank you. I didn't think so. But, for such an epic project, best to check.