My 3D printed Diffraction horn for compression drivers OTOP12

High power and fidelity from an easy to build cabinet.
Post Reply
Message
Author
User avatar
Seth
Posts: 3127
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:
Contact Seth

Re: My 3D printed Diffraction horn for compression drivers OTOP12

#16 Post by Seth »

amcsc4 wrote: ↑Fri Oct 08, 2021 7:05 pm Is there any chance of getting the pics reposted? I would love to see this.
Send the OP a PM. He may (or may not) get email notifications.
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Top
MikeLicht
Posts: 90
Joined: Tue Sep 07, 2010 10:30 am

Re: My 3D printed Diffraction horn for compression drivers OTOP12

#17 Post by MikeLicht »

Id like to find the .stl and try to print one
Finished and making Music - TAT 16" with MCM 8
T39,s with HL10C sold :(
coming up Otop 12 and unknown Sub
Top
User avatar
Bill Fitzmaurice
Site Admin
Posts: 29086
Joined: Tue May 02, 2006 5:59 pm

Re: My 3D printed Diffraction horn for compression drivers OTOP12

#18 Post by Bill Fitzmaurice »

The OP hasn't been here for two years.
Top
tallevan
Posts: 92
Joined: Sun Oct 20, 2019 12:15 pm
Location: London, England

Re: My 3D printed Diffraction horn for compression drivers OTOP12

#19 Post by tallevan »

You might try the wayback machine at web.archive.org.

Look for https://uwpltd.com around the time the post was made.
Top
Post Reply

Return to “Omni Bass/Key/PA Speakers”