Page 2 of 2

Re: alternate drivers for goldwood woofer & tweeters

Posted: Thu Aug 11, 2016 11:12 am
by srini_r
Tom Smit wrote:http://www.parts-express.com/pedocs/mor ... -40765.pdf
http://www.parts-express.com/pedocs/spe ... -sheet.pdf
http://www.visaton.com/pdfexport/de/ser ... r10_8.html

Here are three response graphs plus the driver specs. As you may notice, they are pretty similar; to my eyes the Visaton holds a bit of an edge against the others.

Why are you going with a TLAHPro? For a Home Theatre, a regular TLAH will be very good. The Pro version is for big venues such as a gymnasium, House of Worship or for outdoors.

Hi Tom,

Thanks for the information.

my preference would be Alpha 4, since i'm now familiar with their India distributor

As for the SLA pro, i'm using the 4X6 design intended to be used as rear channels.

Re: alternate drivers for goldwood woofer & tweeters

Posted: Thu Aug 11, 2016 11:52 am
by Bill Fitzmaurice
Tom Smit wrote: Why are you going with a TLAHPro? For a Home Theatre, a regular TLAH will be very good. The Pro version is for big venues such as a gymnasium, House of Worship or for outdoors.
+1. Neither TLAH Pro nor SLA Pro have any business in a home theater, unless it seats more than thirty. :shock:

Re: alternate drivers for goldwood woofer & tweeters

Posted: Thu Aug 11, 2016 12:08 pm
by srini_r
Bill Fitzmaurice wrote:
Tom Smit wrote: Why are you going with a TLAHPro? For a Home Theatre, a regular TLAH will be very good. The Pro version is for big venues such as a gymnasium, House of Worship or for outdoors.
+1. Neither TLAH Pro nor SLA Pro have any business in a home theater, unless it seats more than thirty. :shock:

Thanks Bill for the advise.

On my cross-over question, would the design change if I use Apha 4?