BillFitzmaurice.info

Posted: **Tue Feb 09, 2016 2:13 pm**

ctmullins wrote:
Bruce Weldy wrote:
y2kindyz wrote: Will the GX5 be able to run 2 pair off of each channel in the future?
And no....the GX5 will not run 4 boxes with 3012LFs in 'em. Go to a GX7.
Do you really mean "2 pair" per channel? As in, four cabs on one channel and four on the other channel? That would be 2.5 ohms on each channel, and the GX5 isn't rated for less than 4 ohms per channel, so that's a bonfire of vanity there.

I meant running 1 pair per channel, my bad. Should have read 2 cabs per channel.

thank you all for the Info.. Time to start saving up for the 3012's.
Edit: 4 or 8 Ohm?

Posted: **Wed Feb 10, 2016 3:03 am**

8 ohm. This will give a 4 ohm per channel load to your amp with 2 cabs per channel.

Posted: **Thu Feb 11, 2016 12:00 am**

commander_dan wrote:8 ohm. This will give a 4 ohm per channel load to your amp with 2 cabs per channel.

Thank you

BillFitzmaurice.info

OTop 12 And T30's SPL

Re: OTop 12 And T30's SPL

Re: OTop 12 And T30's SPL

Re: OTop 12 And T30's SPL