Thanks Mr Dougherty.
As/when I get better with sound in general (and build more cabs), I will consider it more...
OT12's with compression drivers
-
Grant Bunter
- Posts: 6912
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: OT12's with compression drivers
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
gdougherty
- Posts: 2623
- Joined: Sun Jan 28, 2007 11:13 am
- Location: Denver, CO
- Contact:
Re: OT12's with compression drivers
Grant Bunter wrote:Thanks Mr Dougherty.
As/when I get better with sound in general (and build more cabs), I will consider it more...
Welcome, it's been a long journey for me so far and as Bill's knowledge and experience show, that road goes quite a bit further than where I'm at.
I started out with a pair of Peavey SP2's a pair of amps, some junky Fender wedges and a Yamaha MG32fx. Here I am just over 6 years on with a small herd of OT12's and T48's, rack full of QSC and Crown amps, trunks full of cabling, a 40 channel SAC setup for mixing and my newest addition is an octet of db Technologies FM12's. I think I've just moved up into true ankle-biter status. :wink: