Page 2 of 3
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Sat Dec 17, 2011 6:08 pm
by Michael Ewald Hansen
doncolga wrote:Phaedras wrote:
Thanks man.. I'm not going to add a second pair to this setup as its not mine but a permanent install at my university.
In that case they should build about 4-6 more and leave them in the corner...woohoo!
Haha, i've built the first pair and I'm not building the second without getting paid for it - so i'd rather build something for myself.. Starting with a TT.. Then I might venture into building a serious rig later
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Wed Jan 04, 2012 11:01 pm
by RENDOG
Oh man....I thought the objects moving were on the v-plate. Then you showed that the subwoofers were across the room and I was like NICE!!!
Awesome stuff.
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Thu Jan 05, 2012 10:03 am
by Michael Ewald Hansen
RENDOG wrote:Oh man....I thought the objects moving were on the v-plate. Then you showed that the subwoofers were across the room and I was like NICE!!!
Awesome stuff.
Hehe, imagine the faces of the guys in the bar who was getting a demonstration: jaw-dropping!
The output of 2 T39's when corner loaded and v-plated is absolutely amazing.. Can't wait to get started on more BF cabs.. Ordered a MCM 55-2421 earlier this week for a T18 for my parents HT.. Im sure it'll be awesome too
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Wed Jan 11, 2012 9:50 am
by Whiterob
I put my T-39's on hold for a while, but reading this again gave me inspiration to get em done. Leland, I think I will be ordering some parts friday
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Wed Jan 11, 2012 1:34 pm
by Michael Ewald Hansen
Whiterob wrote:I put my T-39's on hold for a while, but reading this again gave me inspiration to get em done. Leland, I think I will be ordering some parts friday
Awesome.. These cabs are nothing short of amazing.. When I first fired up 1 T39 for the first time i thought - cool, thats really nice etc.. When I eventually finished the second one and corner loaded these puppies with a v-plate it was a whooole other reaction!
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Thu Jan 12, 2012 10:58 am
by 88h88
Still need to make a V plate for ours.......
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Thu Jan 12, 2012 2:58 pm
by Michael Ewald Hansen
88h88 wrote:Still need to make a V plate for ours.......
Do it! Its fast and doesnt take much preparation - and you gain as much as adding another cab to the stack..
Made mine and installed t-nuts for mounting it to, in about an hour..
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Sat Jan 14, 2012 9:54 am
by 88h88
Need to find someone who stocks decent ply first at which point my existing 2 will be joined by another 2 AND a v-plate.
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Sat Jan 14, 2012 10:35 am
by Michael Ewald Hansen
88h88 wrote:Need to find someone who stocks decent ply first at which point my existing 2 will be joined by another 2 AND a v-plate.
You dont exactly need BB grade ply for a v-plate.. Pretty much any ply will do just fine
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Sat Jan 14, 2012 11:43 am
by 88h88
True but I may as well just get a job lot of it and get making more speakers. Anyway, nice job on those.
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Wed Jan 25, 2012 1:35 pm
by beofservice
AHHHHHHH! Youtube defaults the volume to full! Now I will be deaf for the next 20 minutes...
Outstanding demo with the stuff on the table!
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Wed Jan 25, 2012 3:32 pm
by Michael Ewald Hansen
beofservice wrote:
AHHHHHHH! Youtube defaults the volume to full! Now I will be deaf for the next 20 minutes...
Outstanding demo with the stuff on the table!
Haha thanks.. And yea, it IS pretty loud.. However, the mic on my iPhone didnt distort a lot, which was surprising!
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Wed Mar 21, 2012 3:19 am
by 88h88
Fiiiiiinally got around to starting the v-plate last night as we're supposedly supplying sound for a friend's birthday gig on Friday (nothing like a deadline to make you work). It's all been chopped out to size though at first we thought a leftover sheet we had was 2" too short, turns out we were mistaken so that got cut up. Need to add a handle, figure out the best way to attach it to the cabs and then get it done. Luckily I have tomorrow and Friday off so I can spend some quality time filling and painting things.
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Wed Mar 21, 2012 7:50 am
by Michael Ewald Hansen
88h88 wrote:Fiiiiiinally got around to starting the v-plate last night as we're supposedly supplying sound for a friend's birthday gig on Friday (nothing like a deadline to make you work). It's all been chopped out to size though at first we thought a leftover sheet we had was 2" too short, turns out we were mistaken so that got cut up. Need to add a handle, figure out the best way to attach it to the cabs and then get it done. Luckily I have tomorrow and Friday off so I can spend some quality time filling and painting things.
Thats cool.. Cant wait to hear your impression of the Titans with the v-plate on.. I put 2 strips of weatherstripping on the inside of the v-plate and drilled 2 holes in the side of the cabs, then mounted 2 t-nuts in each cab and found a bolt that fit to mount it
Re: Titan39's v-plated and corner loaded playing "A Milli"
Posted: Wed Mar 21, 2012 10:30 am
by Tom Smit