Speakerhardware.com

[LelandCrooks]

Thanks Jswing.

You're welcome on the Duratex, Doug, but AcryTech deserves the credit. I'd been happily shipping it out, when I pulled three gallons one day. There was quite a weight discrepancy, so I weighed them. 8.5, 9 and 10.2 lbs, supposed to be 9 lbs. I dropped Acrytech a line about QC on the scales when they fill. They pulled some from the batch and discovered it was gelling in the buckets. Everybody who'd bought from me got a new gallon from them, and they replaced my order in 3 days.

Good people, good product.

[David Carter]

Good people, good product.

+1. The first time I used Duratex, the results were less than spectacular. After some discussion with one of the Acrytech guys on the phone, I realized that I had not followed the instructions regarding application conditions and procedure very well, so it was my fault. Even though they could have used that against me, they didn't. Instead they sent me a free gallon and one of their textured rollers to help make sure I had a better experience the next time. It worked, and I've rolled Duratex using their roller on every cab I've built since then.

[LelandCrooks]

1st come 1st served. In stock only.

1 in stock. Crown Xti 4000 $750, with the crown rebate of $200 makes your cost $550. No I won't pay the freight at this price, nor program the dsp. Save over $400

2 in stock Crown Xti 2000 SOLD

http://www.crownaudio.com/rebatefiles/X ... 090110.pdf

Email me at questions@speakerhardware.com to get these prices.

[subharmonic]

Any new coupons?

[LelandCrooks]

New Blog is up. http://blog.speakerhardware.com/

[LelandCrooks]

Getting out of the amplifier business. Too much money tied up for no profit.

Here's what I have left
Crown XLS2000 2 in stock. $365 each
Crown XLS2500 2 in stock $442 each
Crown Xti 4000 1 in stock $731

These are at my cost. It kills me that I see places selling below this. They're used for loss leaders.
You have to email me to get these. questions@speakerhardware.com

Still going to do digmoda, just because I think they're cool.

[el_ingeniero]

Getting out of the amplifier business. ...
These are at my cost. It kills me that I see places selling below this. They're used for loss leaders.

If they're not losing money, I probably can't afford it. Their loss is my gain ... you don't want to know what I paid for 2 brand new Xti 2000 amps ...

Still going to do digmoda, just because I think they're cool.

So do I. Wish I could afford them. I love the form factor.

[LelandCrooks]

GT1016's are out of stock. Goldwood won't have more until the 15th of March. They were supposed to be in last week, and got bumped to the next container.

[badgerman]

GT1016's are out of stock. Goldwood won't have more until the 15th of March. They were supposed to be in last week, and got bumped to the next container.

And I was just getting ready to finally order some...

[LelandCrooks]

Duratex back in stock. Piezos the first of next week.

[LelandCrooks]

Duratex in PINTS!

http://www.speakerhardware.com/duratex_ ... exPTRG.php

[DJPhatman]

A pint and a 4" roller for $20 shipped?

HOLY $HIT, Leland! That is just too cheap!

[doncolga]

Duratex in PINTS!

http://www.speakerhardware.com/duratex_ ... exPTRG.php

Should a pint cover two Omnitop 12's?

Thanks!

Donny

[LelandCrooks]

I need to change the description. It's a 3" roller, made for touchups. I hadn't seen them when I posted that. If you're nice to it it will probably do a couple of cabs, but it's not as good a handle as the 4" steel one.

I doubt that a pint will cover 2. 1 probably.

[LelandCrooks]

All the neo's except the 3015 are in stock. The 3012 and 3015LF are restricted to kit sales only. The 2510,12,15 and 3012ho's are available for individual sale, at least for a while.