G'day, having trouble identifying woofers in a local online auction
48th week of 2006 for the date, could you guys decode the 122256 model..?
They look like Delta Pro's, but 16 ohm..?
Identifying Eminence Woofer
-
Keryn O'Shea
- Posts: 664
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Identifying Eminence Woofer
You do not have the required permissions to view the files attached to this post.
AT8 14", AT10 19", T30 28" LAB12, T48 36", THT 20", SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8 MA, WH10 CD, DR280 MA, XF210.
-
Bill Fitzmaurice
- Site Admin
- Posts: 29145
- Joined: Tue May 02, 2006 5:59 pm
Re: Identifying Eminence Woofer
You need to ask Eminence.
-
Bruce Weldy
- Posts: 8714
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Identifying Eminence Woofer
Ferrite magnet and 16 ohms....good chance that it's something they built for an OEM.
I just sent a note to my contact there.....maybe we can get you an answer.
I just sent a note to my contact there.....maybe we can get you an answer.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
-
Bruce Weldy
- Posts: 8714
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Identifying Eminence Woofer
Just what I thought.....
From Eminence....
Hello Bruce,
It is an OEM,
Created in 2004. This one MFG in 2006
None in stock.
300 watts
3” VC
16 ohm.
I can’t tell what kind of cabinet
Pro, Bass, or guitar.
More likely Pro. We don’t have in 16 ohm
From Eminence....
Hello Bruce,
It is an OEM,
Created in 2004. This one MFG in 2006
None in stock.
300 watts
3” VC
16 ohm.
I can’t tell what kind of cabinet
Pro, Bass, or guitar.
More likely Pro. We don’t have in 16 ohm
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
-
Keryn O'Shea
- Posts: 664
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Identifying Eminence Woofer
Thank you very much for taking the time Bruce 
AT8 14", AT10 19", T30 28" LAB12, T48 36", THT 20", SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8 MA, WH10 CD, DR280 MA, XF210.
-
Bruce Weldy
- Posts: 8714
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Identifying Eminence Woofer
Happy to help.....
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
-
Bill Fitzmaurice
- Site Admin
- Posts: 29145
- Joined: Tue May 02, 2006 5:59 pm
Re: Identifying Eminence Woofer
Based on the cast frame and 3" coil probably a Gamma Pro OEM. Long discontinued I can't find specs for it.
-
Keryn O'Shea
- Posts: 664
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Identifying Eminence Woofer
Thank you very much also BillBill Fitzmaurice wrote: ↑Thu Jul 23, 2026 4:51 pm Based on the cast frame and 3" coil probably a Gamma Pro OEM. Long discontinued I can't find specs for it.
Not sure if l can resist going to inspect & test these!
AT8 14", AT10 19", T30 28" LAB12, T48 36", THT 20", SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8 MA, WH10 CD, DR280 MA, XF210.