Throat Sheath Brace Size

The Jack of All Trades pro-sound cabs.
Post Reply
Message
Author
User avatar
fender3x
Posts: 647
Joined: Mon May 15, 2006 11:51 am
Location: miami

Throat Sheath Brace Size

#1 Post by fender3x »

I realized that I have two circles with a 5 1/8" radius left over after cutting out my woofer spacers. The throat sheath braces are to be cut from a 5" radius circles. Is 5 1/8" close enough, or should I trim them?
One man's magic is another man's engineering. --Heinlein

1 x DR250
1 x T39
1 x Omni 10

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28620
Joined: Tue May 02, 2006 5:59 pm

Re: Throat Sheath Brace Size

#2 Post by Bill Fitzmaurice »

Close enough, but the length and height will have to be adjusted to fit.

User avatar
fender3x
Posts: 647
Joined: Mon May 15, 2006 11:51 am
Location: miami

Re: Throat Sheath Brace Size

#3 Post by fender3x »

Great! Thanks, Bill!
One man's magic is another man's engineering. --Heinlein

1 x DR250
1 x T39
1 x Omni 10

User avatar
fender3x
Posts: 647
Joined: Mon May 15, 2006 11:51 am
Location: miami

Re: Throat Sheath Brace Size

#4 Post by fender3x »

In an abundance of caution, I made a paper sheath brace using a 5" radius and a 5.125" radius. You can see that the 5.125 radius is slightly flatter...but at it's most profound, the difference is about 1/32". I generally think I am doing well when my errors are in this range ;-)
One man's magic is another man's engineering. --Heinlein

1 x DR250
1 x T39
1 x Omni 10

Post Reply