Australian Options - Suppliers / Drivers etc

Helpful hints on how to build 'em, and where to get the stuff you need.
Post Reply
Message
Author
Keryn O'Shea
Posts: 250
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#106 Post by Keryn O'Shea »

https://hammerroo.com.au/products/unobo ... e-adhesive

If you watch the video on its page, what looks like expanded adhesive is scraped off with a chisel...
Turns out, these guys are just around the corner from me in Loganholme, sweet!
I'll fit this next panel, then off to bed...

Keryn O'Shea
Posts: 250
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#107 Post by Keryn O'Shea »

By how much.. we'll see
Attachments
20221029_155148.jpg
I'll fit this next panel, then off to bed...

Keryn O'Shea
Posts: 250
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#108 Post by Keryn O'Shea »

Ok next item for an alternative is Duratex, it's available, but at $170 + shipping for 3.8L, I'd be happy to start experimenting with other products. Has anyone bought "Rockard" lately?
Also like everything else, contact cement and carpet have shot up as well.
Is anyone able to comment on veneer or 2pac paint costs, verses carpet or Duratex?
Glad l still have a couple of litres left over..
Attachments
20221105_065608.jpg
I'll fit this next panel, then off to bed...

Grant Bunter
Posts: 6725
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Australian Options - Suppliers / Drivers etc

#109 Post by Grant Bunter »

Keryn O'Shea wrote: Fri Nov 04, 2022 4:10 pm Ok next item for an alternative is Duratex, it's available, but at $170 + shipping for 3.8L, I'd be happy to start experimenting with other products. Has anyone bought "Rockard" lately?
Also like everything else, contact cement and carpet have shot up as well.
Is anyone able to comment on veneer or 2pac paint costs, verses carpet or Duratex?
Glad l still have a couple of litres left over..
Good grief man, we're going through the same processes lol.

Rockard is gone. Neil passed away years back and the family continued for a while, but it's no longer available.
Cannon is the Aussie importer (for Duratex) I believe, and the price you have above is their price.
Amazon.com.au has Granatone Speaker cab paint at $220 for 3.8l.
Warnex cab paint is available from Penn Elcom online is $450 for 5.1l
Tuff cab from the UK doesn't seem to be available here.

That's about it for the tougher road ready finishes I'd reckon, paint wise.

Ute bed paint:
Rustoleum 3.8l is $230 in kit form from Supercheap.

Ute bed paint appliers like Rhino or LineX might be worth a chat to for them to apply finishes for road ready gear.

I'd only go with known brands or harder durable finishes for tour/outdoor stuff.

Veneer: why not? Looks great for HT stuff, You can still use black Japeen stain if it has to match other stuff. Or have a crack at piano black finish.
Bunnings used to sell veneer in larger sheets years ago, don't know about now though.
Or, ring around the better timber supply companies in Brissie mate
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" BP102 , 2 x 28" 3012lf.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Bruce Weldy
Posts: 8031
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Australian Options - Suppliers / Drivers etc

#110 Post by Bruce Weldy »

Don't know if you have it there, but Krylon makes a "hammered" spray paint in a rattle can. A whole bunch of coats of primer and a couple of top coats of that might be worth a try. It looks kind'a like duratex, but isn't nearly as tough. Just one more option.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Keryn O'Shea
Posts: 250
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#111 Post by Keryn O'Shea »

Great info and ideas as usual Grant, I like the Rhino coat idea most.
I'll check around for something like that Bruce thank you, can you tell us what Duratex is going for in the US?
I have a few customers who are painters/builders, I'll rattle their cages..
Also I didn't realise how crap our dollar is atm.
I'll fit this next panel, then off to bed...

Bruce Weldy
Posts: 8031
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Australian Options - Suppliers / Drivers etc

#112 Post by Bruce Weldy »

Keryn O'Shea wrote: Sat Nov 05, 2022 10:30 pm Great info and ideas as usual Grant, I like the Rhino coat idea most.
I'll check around for something like that Bruce thank you, can you tell us what Duratex is going for in the US?
I have a few customers who are painters/builders, I'll rattle their cages..
Also I didn't realise how crap our dollar is atm.
Duratex is right at $80/gallom from Leland....that's where I've always bought it.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Grant Bunter
Posts: 6725
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Australian Options - Suppliers / Drivers etc

#113 Post by Grant Bunter »

Bruce Weldy wrote: Sun Nov 06, 2022 4:34 pm Duratex is right at $80/gallom from Leland....that's where I've always bought it.
Tha's around $125AU retail.
Shipping from the US is killer ATM, has been for some time, probably will be for some time...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" BP102 , 2 x 28" 3012lf.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

Bruce Weldy
Posts: 8031
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Australian Options - Suppliers / Drivers etc

#114 Post by Bruce Weldy »

Grant Bunter wrote: Mon Nov 07, 2022 3:19 am
Bruce Weldy wrote: Sun Nov 06, 2022 4:34 pm Duratex is right at $80/gallom from Leland....that's where I've always bought it.
Tha's around $125AU retail.
Shipping from the US is killer ATM, has been for some time, probably will be for some time...
Hell, shipping within the US has gotten pretty steep too. I didn't realize the exchange rate was that much in favor of the US dollar over AU.

6 - T39 4-25" 2-22" 3012LF
4 - OT12 2512 Melded/NSD2005
1 - T24
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Keryn O'Shea
Posts: 250
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#115 Post by Keryn O'Shea »

Evening all, there was a wedding I played at long ago which the bride produced a white fabric which was very thin but stretchy to wrap the cabs up in to fit the decor of the room, it was able to hide the black duratex nearly completely, but you could hold it to your mouth and breath through it easily.. could anyone name it? Reason is as I have a couple of frankencabs I'm playing with, which were carpeted and I ripped it off.. now I couldn't be bothered getting the old contact cement off, plus the ply surface isn't worth the work to get it to paint, also I like seeing the shoddy workmanship and busted arse look of them and don't want to cover them up permanently. Cheers
I'll fit this next panel, then off to bed...

User avatar
Seth
Posts: 2270
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Australian Options - Suppliers / Drivers etc

#116 Post by Seth »

Spandex/Lycra/Elastane perhaps?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Post Reply