Curvearray questions
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Curvearray questions
There's not quite, but just enough room for this arrangement, once l grind the frames partially or off completely. Am l asking for trouble this way?
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Curvearray questions
Only just misses the driver frame, and poking out the top..
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Curvearray questions
Heaps of room..
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Curvearray questions
I don't know how the baffle didn't break between the middle two, just need to make the filters, and away we go, cheers
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
Re: Curvearray questions
That came out really nice. Great job Keryn
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Re: Curvearray questions
Agreed! Excellent craftsmanship. They look right at home.
Good food, good people, good times.
4 - AT
1 - TT
1 - THT Slim
2 - SLA Pro 4x6 Alphalite
4 - AT
1 - TT
1 - THT Slim
2 - SLA Pro 4x6 Alphalite
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Curvearray questions
Thank you very much!
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
-
- Posts: 599
- Joined: Fri Nov 13, 2015 9:34 pm
- Location: Vancouver BC & Bloomington IN
Re: Curvearray questions
Looks good. What's the verdict on how it sounds?
2xT30 (20", 3012LF)
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas
-
- Posts: 262
- Joined: Thu Oct 22, 2020 1:46 pm
- Location: DFW
Re: Curvearray questions
Like others said you did an excellent job on adding those to the existing cabinet.
I had to look twice just to see if it was a photoshopped layout.
I had to look twice just to see if it was a photoshopped layout.
Weldon Carter
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Curvearray questions
Cheers for the high praise! The filter components showed up today, l hope to have time this weekend to build, fit & fire them up. I ordered the coils all in 24awg, but they all look different wire sizes.. wth?
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
Re: Curvearray questions
The top two are 21 gauge, and the bottom one is 18 gauge (I looked up the part numbers).
TomS
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Curvearray questions
Good job mate!
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Curvearray questions
Roger, who knows what went on there, thanks Tom.
Cheers Grant!
I'll hope for fitting the filter & having a listen during the week, out of free time for this weekend..
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L
-
- Posts: 452
- Joined: Sat Jan 26, 2013 5:50 pm
- Location: Brisbane, Australia
Re: Curvearray questions
Sounds great man! I feel the Jaycar filter components must've been average, anything I've refitted with Jantzen has always been noticeably better SQ. Also one thing l noticed mucking around with this cab is the adhesive has bulged a little under the paint, which is annoying. I think it was a "Soudal" branded one a house builder suggested.
There's only one problem, now this Curvearray doesn't match the TLAHs, good enough reason to build a 9x...
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FLat, J12 Flat, OT12 Flat, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 Mld'd, XF210. Next J10L