Simplexx 12 Build

Post your build odyssey here.
Message
Author
User avatar
Bill Fitzmaurice
Site Admin
Posts: 28620
Joined: Tue May 02, 2006 5:59 pm

Re: Simplexx 12 Build

#16 Post by Bill Fitzmaurice »

Don't sweat the coil positions. If you had high pass and low pass both on the same board you would want the coils wide apart on different axis to prevent cross talk between the coils on the low pass and high pass. With them on separate boards that's not a consideration, although you do want to keep them at least an inch apart so that they can't affect each others values.

argon
Posts: 44
Joined: Mon Jan 17, 2011 5:59 pm
Location: Upstate NY

Re: Simplexx 12 Build

#17 Post by argon »

Thanks again!

Post Reply